Block caving is an efficient underground mining method for extracting massive and low-grade ore deposits, which are too deep for traditional open-pit mining. However, in the case of orebodies with uranium mineralization, the extraction of broken rock from drawpoints will bring harmful radon gas into working areas. Airborne diesel particulate matter and dust produced from mining activities also contribute to the emissions on the production level. Maintaining relatively negative pressure in the cave by installing exhaust fans is one of the most effective approaches to mitigate gas emission concerns. The selection of proper fan systems is highly related to airflow behavior within the cave. Due to the dynamic caving process and complex cave structure, estimation of cave airflow resistance through field studies is difficult. This study developed a 1:100 scaled experimental and numerical model to investigate the effects of cave parameters (cave porosity, particle size, and undercut structure) on airflow resistance under parallel fan conditions. Results showed that cave airflow resistance increases with decreasing cave porosity and particle size; cave airflow behavior is significantly affected by undercut drift closure and the use of additional fans. This study provides valuable information to optimize ventilation system design in block cave mines.
7 August 2025 in International Journal of Refrigeration
In underground mining, blasting-induced pollutants are diluted and exhausted out of the working area using the auxiliary ventilation system, which can account for up to 50% of the total mine ventilation electricity consumption. Few detailed studies have been published on the mechanisms and the dilution efficiency of forcing, exhaust, and overlap ventilation systems. To date, no systematic investigation has considered the effect of important factors, such as porosity, muckpile profile, type of explosives, and humidity on the post-blast dilution time. This research seeks to address these issues and make post-blast dilution time estimation more accurate and realistic. Numerical models were developed using computational fluid dynamics software to simulate blast fume dispersion and clearance in an underground development heading. Phase 1 study results show that on average, the time to reach the permissible exposure limit is approximately five-fold faster for the forcing system than the exhaust system and slightly more efficient than the overlap system. Phase 2 study results show that the porosity of the muckpile and explosive type have a significant impact, the muckpile profiles have an inverse effect, and the relative humidity has little to no impact on dilution time at lower temperatures (~0–30°C).
In underground mines, accurate prediction of dilution time is crucial to protect miners from toxic fumes as well as minimize production delays and ventilation costs. Previous researchers have used empirical equations, mine ventilation software, and computational fluid dynamics to calculate dilution time. These traditional methods have high computational cost and design limitations. In this research, machine learning (ML) techniques and data analytics were used to: (i) develop a ML model to predict dilution time based on five on-site blasting and auxiliary ventilation parameters and (ii) determine the order of importance of these parameters. The advantages of using the ML model over the traditional methods are its ability to consider a large number of factors, detect complex nonlinear relationships, and predict the dilution time near-instantaneously. Results show that the normalized artificial neural network has the best prediction capability with an R2 of 0.987. Among the blasting and ventilation parameters measured, air volumetric flow rate significantly affected the dilution time, followed by duct distance from face and the amount of explosive.