1 August 2022 in Cellulose
Wood pulp fibres are promising reinforcements for biocomposites due to their renewable resource origin and mechanical properties. An oriented and dense fibre reinforcement structure is beneficial for biocomposite properties. We present a method of modifying fibres (e.g. to increase strain to failure) in pre-formed oriented high-density paper structures intended for biocomposites or as hot-pressed fibre materials. Mildly delignified, well-preserved holocellulose fibres from softwood are used. Cold alkali treatment (hemicellulose removal) and mercerisation (conversion to cellulose II) were carried out successfully on oriented fibre sheets. Controlled anisotropy and sheet density are achieved from untreated and straight fibres in the sheet formation step. High mechanical properties and increased ductility of mercerised sheets were observed, which may be valuable for hot-pressed fibre materials (E ≈ 7.1 GPa, strength of 108 MPa and strain to failure of 5.3%) and biocomposites. In contrast, modified wood pulp fibres were difficult to orient, resulting in higher sheet porosity and weak interfibre bonding. Graphical abstract
10 March 2026 in Waste Management
The growing volume of textile waste poses a serious environmental concern, primarily due to the dyeing and finishing processes used in textile manufacturing. Much of the resulting waste is either incinerated or landfilled, releasing harmful chemicals into the air, soil, and water. Sustainable textile recycling is therefore crucial; however, existing methods face significant challenges, particularly due to the presence of dyes. Here, we demonstrate a closed-loop recycling strategy for dope-dyed cellulosic fibres using three solvent systems: viscose, N-methylmorpholine N-oxide (NMMO)-Lyocell, and Ioncell. Regenerated cellulose fibres were produced from dope-dyed viscose and compared in terms of processability, molecular integrity, mechanical performance, thermal stability, and colour retention. Among the tested routes, NMMO-Lyocell- and Ioncell processes yielded fibres with superior tenacity (up to ∼ 32 cN/tex) and minimal colour shift (ΔE < 1). In contrast, the viscose process led to partial depolymerisation and reduced strength. The findings establish that dope-dyed cellulosic fibres can be efficiently recycled without re-dyeing or significant loss of mechanical performance, offering a pathway toward circular textile manufacturing and reduced chemical burden in the fibre-dyeing sector.