1 April 2016 in Composites Part B: Engineering
28 July 2015 in International Journal for Numerical and Analytical Methods in Geomechanics
22 February 2013 in Engineering Computations
Purpose: The purpose of this paper is to use the discrete element method (DEM) to model the fracture behaviour of brittle materials in 2D.Design/methodology/approach: The material consists of a set of particles in contact with a close‐packed structure. It allows the derivation of an expression for the stress intensity factor as a function of the contact forces near the crack tip. A classical failure criterion, based on the material's toughness, is then adopted for the analysis of crack propagation, represented by the contact loss between particles.Findings: The DEM approach is compared to two tensile cases (mode I); both presenting a monotonous convergence towards classical solutions for more precise discretization.Originality/value: The paper proposes a DEM approach in fracture mechanics of isotropic brittle materials entirely compatible with continuous classical theory. Hence the toughness value is directly introduced as a parameter of the material without any previous calibration of the DEM.
27 April 2016 in International Journal for Numerical and Analytical Methods in Geomechanics
1 June 2020 in IOP Conference Series: Materials Science and Engineering
This paper presents a fracture behavior modeling of Ultra-High Performance Fiber Reinforced Concrete (UHPFRC) slabs under contact blast loading using the finite element method. The UHPFRC is supposed to be brittle material and follow the Johnson–Holmquist-II(JH-2) model. The steel rebar is modeled using the elasto-plastic model. The Emulsion Explosive has been used and modeled by the SPH method. UHPFRC slabs with the dimensions 1000mm of length, 800mm of width and 120mm of thickness is considered. The steel fibers with a volume fraction of 2% is used. The UHPFRC material is fabricated in laboratory using the material available in Vietnam. The concrete crater and spall damage of UHPFRC slab under contact blast loading are considered. The numerical results are compared with experiment. These results allow to evaluate the resistance against blast load of UHPFRC fabricated in lab.
1 March 2016 in Applied Mechanics and Materials
A promising way to model fracture mechanics with the use of an original Discrete Element Method (DEM) is proposed. After proving the ability of the method to capture kinetic damage induced by cracking phenomena in brittle materials such as silica [1], taking advantage of the method for composite materials applications is the main purpose of this work. This paper highlights recent and current developments to prove abilities of the DEM to give some answers to challenges : i) use the present DEM to model damage mechanisms (matrix cracking, debonding, fiber break and delamination) in a composite material ii) deal with impact applications on dry fabrics using the DEM. All developments are made in the home made software GRANOO (GRANular Objet Oriented) [2]. The promising results are commented and the on going developments are exposed.