Point defects such as oxygen vacancies and protonic interstitials are not only essential for ionic conductivity in oxides since they also affect the mechanical and electromechanical properties. These properties of nominally dry and hydrated proton‐conducting BaZr0.85M0.15O2.925+δH2δ (M = Al, Ga, Sc, In, Y, Eu) ceramics are investigated. Doping decreases Young's modulus with increasing ionic radii difference between the dopant and the host. Nominally dry samples show consistently higher Young's moduli than hydrated samples. All samples exhibit large non‐classical electrostriction, with a negative electrostriction coefficient M33100 in the series Ga‐Y, emphasizing the importance of proton trapping, with Y‐doped samples having minimal trapping energy. This coincides with the fact that the saturation strain for Y‐doped samples is also the smallest. In light of these findings, it is concluded that the present data give strong evidence for the existence of defect‐related elastic dipoles in acceptor doped barium zirconate and that the non‐classical electrostriction originates in their reorientation under electric field.
A noncontact displacement system suitable for tracking slow moving surfaces with low reflectivity is demonstrated. The displacement is measured by dynamic tracking of the moving focal plane of the sample under test. The system comprises a camera, a vertical digital piezo driver, and a data acquisition module. The tracking effect is achieved by continuously driving the sample with a 2-μm sweep around the focal plane, simultaneously acquiring the sample position and images of the part of the sample defined as a region of interest (ROI). The position of the focal plane is identified by fitting the contrast of the ROI versus the stage position to a Gaussian function. Using an ROI provides the ability to test various regions across the object and eliminates the demand for the surface to be flat or reflective. The system is low cost, is applicable to a large variety of samples and has an accuracy better than 10 nm.