Mo-Kwon Lee

Mo-Kwon Lee

Auto-generated profile, based on publicly available information

Mo-Kwon Lee

Department of Smart-city Engineering, Inha University, 100 Inharo, Michuhol-gu, Incheon 22212, Korea

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 August 2020 in Energies
Verified
Journal Article
Open access
PDF file
Alsayed MostafaAlsayed Mostafa
Alsayed Mostafa
MKMin-Gyun Kim
Min-Gyun Kim
SISeongwon Im
Seongwon Im
MLMo-Kwon Lee
Mo-Kwon Lee
Seoktae KangSeoktae Kang
Seoktae Kang
Dong Hoon KimDong Hoon Kim
Dong Hoon Kim
Various pretreatment methods have been combined and employed for maximizing the solubilization of waste-activated sludge (WAS). However, the question “by changing the series of applied combined pretreatments (CPs), can the solubilization efficiency of WAS be affected?” has never been addressed. In this study, firstly, thermal (T), alkaline (A), and ultrasonic (U) pretreatments were individually applied at broad strengths (T = 80–120 °C for 30 min, A = pH 9–12, and U = 5–60 min at 300 W). Then, pretreatment conditions that caused similar solubilization (13.0%) (120 °C, pH 11, and 30 min for T, A, and U, respectively), were adopted for CP with reverse sequences of T&A, U&A, and T&U. A similar disintegration degree was observed in U→A and A→U, while a meaningful difference was found in T&A and T&U: T→A (28.3%), A→T (42.9%), T→U (22.9%), and U→T (27.1%). The difference in pretreatment series also affected the characteristics of soluble matters, which was analyzed by excitation emission matrix and molecular weight distribution. Due to these differences, the highest methane yield of 68.8% (based on (chemical oxygen demand) CODinput) was achieved at A→T, compared to T→A (62.3%). Our results suggested a simple strategy for increasing solubilization, at the same expense of energy, which might be beneficial in the following treatment process, such as dewatering and transportation.

20 October 2021 in Energies
Verified
Journal Article
Open access
PDF file
SISeongwon Im
Seongwon Im
MLMo-Kwon Lee
Mo-Kwon Lee
Alsayed MostafaAlsayed Mostafa
Alsayed Mostafa
OPOm Prakash
Om Prakash
KLKyeong-Ho Lim
Kyeong-Ho Lim
Dong Hoon KimDong Hoon Kim
Dong Hoon Kim
In a lab-scale bioreactor system, (20 L of effective volume in our study) controlling a constant temperature inside bioreactor with a total volume 25 L is a simple process, whereas it is a complicated process in the actual full-scale system. There might exist a localized temperature difference inside the reactor, affecting bioenergy yield. In the present work, the temperature at the middle layer of bioreactor was controlled at 35 °C, while the temperature at top and bottom of bioreactor was controlled at 35 ± 0.1, ±1.5, ±3.0, and ±5.0 °C. The H2 yield of 1.50 mol H2/mol hexoseadded was achieved at ±0.1 and ±1.5 °C, while it dropped to 1.27 and 0.98 mol H2/mol hexoseadded at ±3.0 and ±5.0 °C, respectively, with an increased lactate production. Then, the reactor with automatic agitation speed control was operated. The agitation speed was 10 rpm (for 22 h) under small temperature difference (<±1.5 °C), while it increased to 100 rpm (for 2 h) when the temperature difference between top and bottom of reactor became larger than ±1.5 °C. Such an operation strategy helped to save 28% of energy requirement for agitation while producing a similar amount of H2. This work contributes to facilitating the upscaling of the dark fermentation process, where appropriate agitation speed can be controlled based on the temperature difference inside the reactor.