1 September 2022 in Matter and Radiation at Extremes
We propose a new injection scheme that can generate electron beams with simultaneously a few permille energy spread, submillimeter milliradian emittance, and more than a 100 pC charge in laser wakefield accelerators. In this scheme, a relatively loosely focused laser pulse drives the plasma wakefield, and a tightly focused laser pulse with similar intensity triggers an interference ring pattern that creates onion-like multisheaths in the plasma wakefield. Owing to the change in wavefront curvature after the focal position of the tightly focused laser, the innermost sheath of the wakefield expands, which slows down the effective phase velocity of the wakefield and triggers injection of plasma electrons. Both quasicylindrical and fully three-dimensional particle-in-cell simulations confirm the generation of beams with the above mentioned properties.
26 September 2023 in Physical Review Accelerators and Beams
We propose to use tightly focused lasers to generate high quality electron beams in laser wakefield accelerators. In this scheme, the expansion of the laser beam after the focal position enlarges the size of wakefield bubble, which reduces the effective phase velocity of the wake and triggers injection of plasma electrons. This scheme injects a relatively long beam with high charge. The energy spread of the injected beam can be minimized if an optimal acceleration distance is chosen so that the beam chirp is suppressed. Particle-in-cell simulations indicate that electron beams with the charge on the order of nanocoulomb, the energy spread of , and the normalized emittance of can be generated in uniform plasma using laser pulses. An empirical formula is also given for predicting the beam charge. This injection scheme, with a very simple setup, paves the way toward practical high-quality laser wakefield accelerators for table-top electron and radiation sources.
18 February 2022 in Plasma Physics and Controlled Fusion
We propose to use a frequency-doubled pulse colliding with the driving pulse at an acute angle to trigger ionization injection in a laser wakefield accelerator. This scheme effectively reduces the duration of the injection; thus, high injection quality is obtained. Three-dimensional particle-in-cell simulations show that electron beams with energy of , a charge of , energy spread of and normalized emittance of a few millimeter milliradian can be produced by laser pulses. By adjusting the angle between the two pulses, the intensity of the trigger pulse and the gas doping ratio, the charge and energy spread of the electron beam can be controlled.
1 February 2025 in New Journal of Physics
In laser-driven plasma wakefield acceleration (LWFA), laser pump depletion and electron dephasing are the major constraints of the electron energy gain. Hybrid laser-PWFA, which uses the laser-accelerated electron beam to drive a beam-driven plasma wakefield in separated stages, has been proposed to increase the beam brightness. However, the overall electron energy gain in hybrid acceleration is even lower than single-stage laser acceleration. In this paper, we report the observation of the energy boosting effect of the hybrid acceleration in single uniform plasmas through a series of particle-in-cell simulations. The self-injected electron beam from the laser-driven wakefield automatically moves forward to drive the beam-driven wakefield after laser depletion. The electrons at the beam tail are then accelerated by the beam-driven plasma wakefield, and the energy gain is at least doubled compared to previous single-stage experiments with the same laser energy. We also propose the scaling of the electron energy gain and the acceleration distance with the laser energy. For example, with a 9.1 J energy laser pulse and a 3.5 cm long plasma of density, one can produce a quasi-monoenergetic electron beam at 3.5 GeV energy with 23 pC charge.
7 March 2025 in Physical Review Accelerators and Beams
In recent years, the field of positron acceleration in plasma wakefield accelerators has witnessed rapid theoretical advancements, and several effective schemes have been proposed. In these studies, longitudinally uniform plasma is taken into account, with the positron beam located at the start of the second wakefield bubble. The electron filament near the positron beam provides Coulomb attraction force for the guiding of the positron beam. However, the influence of vacuum-plasma transition on positron beams has not been considered yet, where wakefield bubble is larger than that in the density plateau region, and the positron beam is in the defocusing region. In this paper, we study the evolution of positron beam size in the vacuum-plasma transition region and find out that the transition is detrimental to low-energy positron beams. Wide drive beams with relatively large transverse sizes are proposed as a possible solution to this difficulty.
11 May 2022 in Plasma Physics and Controlled Fusion
Due to the highly nonlinear nature of the beam-loading, it is currently not possible to analytically determine the beam parameters needed in a two-bunch plasma wakefield accelerator for maintaining a low energy spread. Therefore in this paper, by using the Broyden–Fletcher–Goldfarb–Shanno algorithm for the parameter scanning with the code QuickPIC and the polynomial regression together with k-fold cross-validation method, we obtain two fitting formulas for calculating the parameters of tri-Gaussian electron beams when minimizing the energy spread based on the beam-loading effect in a nonlinear plasma wakefield accelerator. One formula allows the optimization of the normalized charge per unit length of a trailing beam to achieve the minimal energy spread, i.e. the optimal beam-loading. The other one directly gives the transformer ratio when the trailing beam achieves the optimal beam-loading. A simple scaling law for charges of drive beams and trailing beams is obtained from the fitting formula, which indicates that the optimal beam-loading is always achieved for a given charge ratio of the two beams when the length and separation of two beams and the plasma density are fixed. The formulas can also help obtain the optimal plasma densities for the maximum accelerated charge and the maximum acceleration efficiency under the optimal beam-loading respectively. These two fitting formulas will significantly enhance the efficiency for designing and optimizing a two-bunch plasma wakefield acceleration stage.