The final size and properties of gold nanoparticles are precisely tailored by using organic-bound ligands, which influence their catalytic performance.
A method is introduced to rapidly (<30 min) synthesize single metal nanoparticles with narrow size distribution in a simple way. It is based on the electrospraying of a metal precursor solution into a surfactant solution, which acts as a reducing and stabilizing agent. This synthesis method is demonstrated for the production of Ag and Au nanoparticles, which are incorporated onto carbonaceous and non-carbonaceous supports. The nanoparticle size depends on the internal diameter of the spraying nozzle. The removal of the stabilizing surfactant (dodecylamine; DDA) is also examined via thermal annealing and oxygen plasma treatments. Thermal annealing at a low temperature rate is found to be the most effective, as it completely removes DDA from the metal nanoparticles without inducing changes in their particle size. To verify that the supported Ag nanoparticles post calcination are surfactant-free and, thus, their surface sites are active, their oxygen reduction reaction (ORR) activity is measured in alkaline media, demonstrating similar values to the ones reported in the literature.
Cristobalite, a crystalline form of silica, is shown to be formed within an amorphous titanosilicate, at previously unknown conditions. Mesoporous titanosilicate microspheres (MTSM) were synthesized as efficient catalysts for the epoxidation of cyclohexene with tert-butyl hydroperoxide. High-resolution transmission electron microscopy revealed the presence of crystals in this predominantly amorphous material, after calcination at 750 °C. When calcined at 800 °C, the crystals were identified via PXRD as predominantly cristobalite, which possibly marks its first observation in titanosilicates at such a low temperature, without adding any alkali metals during synthesis. Catalytic experiments conducted with MTSM materials calcined at temperatures varying from 650 to 950 °C, reveal that the amount of cristobalite formed increases with temperature, and that it has a significant impact on the pore structure, and, remarkably, correlates with the catalytic activity of titanosilicates.
We report a new one‐pot synthesis procedure for hierarchical zeolites with intracrystalline macropores and metal particles encapsulated within the zeolitic walls. The synthesis allows to prepare macroporous zeolites of MFI topology with different heteroatoms (silicalite‐1, ZSM‐5 and TS‐1) and different encapsulated noble metal particles, such as gold, platinum and palladium. The hierarchically structured zeolites contain large macropores with diameters around 400 nm, which are well distributed and interconnected and should significantly enhance mass transport properties. The encapsulation of metal nanoparticles within the zeolitic walls leads to remarkable sinter resistance of the particles. Encapsulated gold nanoparticles (2.6 nm) do not significantly change in size during an 18‐hour treatment at 600 °C under air, while non‐encapsulated gold particles sinter heavily during the same treatment. Catalytic experiments for the direct epoxidation of propene with hydrogen and oxygen show that both catalytic functions of a macroporous TS‐1 sample that encapsulates gold particles are accessible and active. This catalyst displays high activity, although PO selectivity could still be improved. These materials show great potential for use in catalytic applications, due to their bifunctional nature, high sintering resistance, shape selective properties and hierarchical structure.
3 September 2024 in Reaction Chemistry & Engineering
An ultra-high vacuum setup was conceived to study Knudsen diffusion in channels with varied geometrical characteristics that can be modified using 3D printing. This new experimental methodology aids to gain insight into diffusion in nanoporous media.