18 April 2024 in IEEE Transactions on Wireless Communications
We consider reconfigurable intelligent surface (RIS) aided sixth-generation (6G) terahertz (THz) communications for indoor environment in which a base station (BS) wishes to send independent messages to its serving users with the help of multiple RISs. For indoor environment, various obstacles such as pillars, walls, and other objects can result in no line-of-sight signal path between the BS and a user, which can significantly degrade performance. To overcome such limitation of indoor THz communication, we firstly optimize the placement of RISs to maximize the coverage area. Under the optimized RIS placement, we propose 3D hybrid beamforming at the BS and phase adjustment at RISs, which are jointly performed at the BS and RISs via codebook-based 3D beam scanning with low complexity. Numerical simulations demonstrate that the proposed scheme significantly improves the average sum rate compared to the cases of no RIS and randomly deployed RISs and also outperforms several benchmark schemes. It is further shown that the proposed codebook-based 3D beam scanning efficiently aligns analog beams between BS–user links or BS–RIS–user links and, as a consequence, achieves the average sum rate close to that of coherent beam alignment requiring global channel state information.
23 October 2023 in IEEE Access
Future cellular networks are expected to benefit from terahertz (THz) frequency bands, which enable high-speed and low-latency wireless connectivity, but several challenges have arisen in utilizing THz bands. In this paper, we first investigate channel characteristics and their modeling for THz bands, highlighting new opportunities and emerging challenges. In this context, we discuss the channel characteristics that become more prominent at THz frequencies than at lower microwave frequencies, such as atmospheric attenuation, scattering, and frequency selectivity. We also review various path-loss and scattering models for THz communications. We further survey the radio frequency front-end nonlinearities that affect THz communications and their modeling for multiple-input multiple-output (MIMO) systems. We then review massive MIMO and hybrid beamforming techniques, and their applicability for THz communications. We identify the challenges that arise from operating at ultra-high frequencies, such as beam blockage, power consumption of large-scale arrays, and beam squint. Finally, we provide an overview of emerging intelligent reflecting surface (IRS) technologies and their potential for enhancing THz wireless networks. We investigate how IRS and massive MIMO technologies can be integrated into THz wireless networks and discuss possible solutions to overcome the limitations that affect the throughput and efficiency of such systems.
14 July 2025 in IEEE Access
With the growing adoption of uplink (UL)-intensive services such as video conferencing, high-definition (HD) streaming, and real-time gaming, the demand for UL resources has increased significantly. Traditional time division duplexing (TDD) networks often struggle to meet these dynamic traffic demands, necessitating innovative solutions such as sub-band full-duplex (SBFD) to enhance resource utilization and network efficiency. To enable scalable and deployment-aware SBFD integration, we consider a hybrid deployment of TDD and SBFD BSs, taking into account practical constraints such as hardware cost and backward compatibility. This study proposes a resource management strategy for multicell networks that facilitates the coexistence of SBFD and TDD to effectively support ultra-reliable low-latency communication (URLLC) and enhanced mobile broadband (eMBB) services for both UL and downlink (DL) communication. The proposed coexistence-based approach significantly reduces delay and increases the maximum number of supportable user equipments (UEs) compared to traditional TDD-only methods. Specifically, we propose a random access-based scheme to facilitate UL URLLC UEs during the flexible SBFD slots. The proposed scheme allows short packets to opportunistically access SBFD UL subbands during flexible scheduling intervals, effectively addressing the stringent latency requirements of high-frequency URLLC transmissions. By dynamically prioritizing URLLC traffic while optimizing resources for eMBB, our strategy provides a balanced and efficient solution for managing diverse traffic demands in dynamic environments.
22 September 2025 in IEEE Transactions on Wireless Communications
Reconfigurable intelligent surfaces (RIS) are emerging as a promising technology for next-generation wireless communications, capable of mitigating severe propagation attenuation, enhancing spectral efficiency, and expanding signal coverage. This paper focuses on online millimeter-wave (mmWave) beam tracking for multi-RIS-assisted hybrid beamforming systems. We develop two novel beam tracking algorithms based on multi-agent deep reinforcement learning (DRL): a multi-agent deep deterministic policy gradient (MADDPG)-based algorithm for continuous-domain beam angle tracking and a multi-agent deep Q-network (MADQN)-based algorithm for codebook-based discrete-domain beam angle tracking. Both algorithms are designed to maximize the sum rate by jointly optimizing analog beamforming for the base station (BS) and reflection coefficients for multiple RISs in dynamic environments, leveraging historical information and without requiring current user position or channel information. After determining analog beamforming and RIS reflection coefficients, digital beamforming for the BS is constructed by estimating the end-to-end effective channel, which significantly reduces the overhead of channel estimation. Experimental results demonstrate that the proposed algorithms effectively adapt the analog beamformer and RIS reflection coefficients to account for user mobility, significantly outperforming existing benchmark schemes.
12 September 2023 in The Aeronautical Journal
In this study a representative sandwich panel is investigated statically in two different configurations under similar bending loads. In one configuration serrations are introduced in the honeycomb core while the other one has un-modified core. Three-point bend test (TPBT) has been performed on both configurations through Finite Element Analysis (FEA) technique using ANSYS Workbench considering American Society for Testing and Materials (ASTM) standards. In both configurations the same aluminium honeycomb core is modelled having an adhesive layer in between adjacent foils to simulate actual scenario instead of relying on the block properties. Honeycomb core offers highest strength in its thickness (T) direction or the z-direction by virtue of its shape. Any distortion in the shape of the honeycomb adversely affects its strength. During bending the honeycomb core witnesses multidirectional forces consequently leading to distortion or crumpling. The serrations in the structure allow bending of the honeycomb core with minimal loss of strength by limiting the deformation to a specific region consequently preserving the shape as well as the strength of the honeycomb core. The results of both samples are compared with respect to deflection, strain and reaction force. It proves that serrated core is more favourable to be used in bent or curved sandwich panels.