Ibuprofen degradation and energy generation in a single-chamber Microbial Fuel Cell (MFC) were evaluated using a bioanode fabricated from devil fish bone char (BCA) synthesized by calcination in air atmosphere. Its performance was compared with conventional carbon felt (CF). Bone char textural properties were determined by nitrogen adsorption. Before and after, the bacterial colonization on the materials was analyzed by environmental scanning electron microscopy. Energy generation was evaluated by electrochemical techniques as open-circuit potential, linear sweep voltammetry, and electrochemical impedance spectroscopy. Ibuprofen degradation was analyzed by High-Performance Liquid Chromatography-Ultraviolet, and the chemical oxygen demand (COD) removal was measured. Results showed a specific area of 136 m2/g for BCA, having enough space to immobilize microorganisms. The micrographs confirmed the biofilm formation on the electrode materials. Over the 14 days, MFC with BCA reached a maximum power density of 4.26 mW/m2, 175% higher than CF, and an electron transfer resistance 2.1 times lower than it. This coincides with the COD removal and ibuprofen degradation efficiencies, which were 43.6% and 34% for BCA and 31.8% and 27% for CF. Hence, these findings confirmed that BCA in MFC could provide an alternative electrode material for ibuprofen degradation and energy generation.
Antecedentes y Objetivos: Prosopis laevigata, especie de amplia distribución en México, es considerada un recurso con importancia ecológica y socioeconómica. A pesar de que sus semillas y frutos tienen valor nutrimental, los estudios sobre su variación morfológica y anatómica son escasos. Este trabajo es el primero en abordar la morfo-anatomía e histoquímica del fruto y semilla de P. laevigata y tiene como objetivo contribuir al conocimiento de su biología y proporcionar las bases para otras investigaciones con un enfoque ecofisiológico en esta y otras especies del género. Métodos: Muestras de frutos y semillas fueron recolectadas de árboles de P. laevigata en una localidad de Lagos de Moreno, Jalisco, México, para analizar sus caracteres morfométricos, anatómicos e histoquímicos. Adicionalmente, se estudió su composición micro elemental mediante microscopía electrónica de barrido (MEB) acoplada a espectroscopia de rayos X de energía dispersiva (EDS). Se aplicaron análisis ANOVA y de correlación para conocer la variabilidad intrapoblacional y asociación entre variables morfométricas. Resultados clave: El coeficiente de variación más alto (47.7%) fue para el número de semillas por fruto. El ANOVA demostró diferencias estadísticas significativas para las variables longitud (F=7.51, p<0.0001) y ancho de la semilla (F=8.75, p<0.0001); la correlación más alta (0.937) fue para ancho fruto-ancho semilla. Los frutos presentan epicarpo, mesocarpo con cristales de oxalato de calcio y endocarpo coriáceo. Las semillas tienen pleurograma, micrópilo subapical, testa gruesa con epidermis de macroesclereidas y osteoesclereidas en la hipodermis. Cotiledones contienen cuerpos de proteína y endospermo con almidón. La testa y el embrión presentan macroelementos (S, K, Mg) y microelementos (Al, Si, Cu). Conclusiones: La estructura morfológica, anatómica e histoquímica de frutos y semillas de P. laevigata fueron similares a otros Prosopis. La epidermis en empalizada, hipodermis con osteoesclereidas en la testa de la semilla, los estomas y cristales prismáticos en las vainas podrían representar caracteres ecofisiológicos importantes.
We demonstrated that the ball-milled slag-SiC mixture is an effective catalyst to grow pyrrolic nitrogen-doped multiwall carbon nanotubes (N-MWCNTs) by aerosol assisted chemical vapor deposition (AACVD) method. N-MWCNTs synthesized at 800 °C, 850 °C and 900 °C were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, x-ray powder diffraction (XRD), and x-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA). TEM characterizations revealed the presence of a bamboo-like structure, a typical feature of nitrogen-doped carbon nanotubes. The presence of nitrogen was confirmed by the N1s XPS spectrum. Furthermore, a deconvolution of the N1s spectra revealed the presence of N-pyrrolic defects. This nitrogen functionality is investigated concerning the presence of silicon carbide material. Giant nanotubes with large diameters were obtained when SiC was added to the slag to be used as a substrate for N-MWCNTs synthesis. From Raman spectroscopy, the appearance of the D-band was observed, indicating the presence of topological defects that were also observed by TEM. XRD and TEM characterizations demonstrated the presence of Fe3C and α-Fe nanoparticles. The N-MWCNTs fabricated here could be used into (electro)catalytic applications or for reinforcing ceramic nanomaterial or polymers.
19 September 2022 in Journal of Environmental Science and Health, Part A
This work characterizes two alternative materials to substitute the most expensive microbial fuel cells (MFCs) components: proton exchange membrane (PEM) and cathode. Crude glycerol biodegradation was studied in MFCs using a clay cup as a PEM and activated carbon and camphor carbon mixture (CAC) as a cathode. The cathode performance was compared with Platinum on carbon cloth. Two clay cup single-chamber MFCs were operated with each cathode and fed with 2000 mg/L of crude glycerol. Electrochemical properties were characterized by linear sweep voltammetry, electrochemical impedance spectroscopy, and chronoamperometry. Biodegradation efficiencies were estimated with the chemical oxygen demand (COD) removal percentage. MFCs with CAC showed a maximum power density of 100 mW/m2. This result was a 43.47% power response regarding MFCs with Platinum. COD removal efficiencies of 94% were achieved in 37 days for both cells. The Columbic efficiencies were 24.04% and 22.78% for the MFCs with Platinum and CAC. The economic analysis showed a cost of USD 9.97 for MFCs with CAC. This cost is five times lower than when using Platinum. MFCs utilizing clay cups and CAC showed an acceptable performance for the bioenergy production from crude glycerol biodegradation above all economic advantage in the cell cost.