The storage of hydrogen in compressed form has evolved as the primary choice for fuel cell vehicle manufacturers. Currently, composite tanks are a mature and promising option for compressed hydrogen storage for the on‐board application. Type IV tank with carbon fiber/epoxy composite with high density polyethylene liner provides high strength, lightweight, and excellent resistance to fatigue and corrosion. However, high pressure and temperature generated during refueling affect the structural stability of the composite tank. The objective of the work is to investigate the mechanical and thermal response of the tank at different refueling conditions specified in SAEJ2601. For this, finite element analysis was used to examine the stresses, strains, deformation, and failure evolution during refueling. The results show good agreement between simulated and experimental reported burst pressure of the tank with 5.52% difference which might be due to the type of carbon fiber used, fiber winding pattern, number of layers, and loading conditions considered for the analysis. The results presented here show some new insight into behavior of composite tanks under dynamic load conditions of refueling.
To achieve accurate prediction of the nonlinear behavior of lithium‐ion battery, parameters of the lithium‐ion battery model play a key role for dynamic performance, hence the parameters of the investigated battery model have been estimated. In this work, the electrical equivalent circuit (ECM) models have been used to simulate INR18650‐20R lithium‐ion battery response at 0°C, 25°C, and 45°C, respectively. The ECM model parameters are estimated using incremental open‐circuit voltage (OCV) profile and Trust‐Region Reflective algorithm by the Non‐Linear Least Squares method. The estimated parameters of the ECM model experimentally validated using independent dynamic current profiles including Dynamic Stress Test (DST), Federal urban driving schedule (FUDS), Beijing Dynamic Stress test (BJDST), and US06 at 0°C, 25°C, and 45°C, respectively. Coulomb‐counting based algorithms are implemented for model‐based online SoC estimation. The investigated ECM model with three parallel RC branches exhibits accuracy below 1.8% for different temperature levels and seems suitable to capture the nonlinear dynamics of lithium‐ion batteries for EV application. It is confirmed that the errors resulting from the investigated ECM model are significantly reduced comparatively existing published models.
1 September 2019 in International Journal of Hydrogen Energy