29 January 2022 in Chemical Engineering Science
17 May 2025 in Water Research
CACaroline Gachet Aquilon
Wastewater treatment plants (WWTPs) are significant sources of micropollutants, potentially adversely affecting freshwater ecosystems. Ozonation is an effective way to abate micropollutants during treatment of wastewater effluent, however, the presence of bromide may lead to bromate, a potentially carcinogenic byproduct. The applicability of a hollow fiber porous membrane-based ozone contactor (MEMBRO3X) was assessed for wastewater effluent treatment for the simultaneous abatement of micropollutants and bromate mitigation by investigating the effects of operating conditions (e.g., hydraulic retention times, gas phase concentrations of ozone and hydrogen peroxide dosing) and water quality parameters (concentration of dissolved organic matter (DOM) and level of alkalinity). In synthetic water containing Suwannee River Natural Organic Matter and bromide, MEMBRO3X showed better performance for relative micropollutant abatement with minimal bromate formation compared to the conventional ozonation in the presence of high DOC concentration and high alkalinity for ozone gas phase concentrations of ≤ 10 gO3 Nm-3. Key ozone mass transfer parameters, including liquid velocity and membrane length, were also investigated to support interpretation of treatment performance. Adding H2O2 improved ozone mass transfer at the membrane interface, but also elevated bromate formation, making this an unfavorable option. Three secondary wastewater effluent samples were investigated, and a similar trend as for synthetic DOM-containing water was observed regarding water quality and process operating conditions. The calculated required membrane surface areas for the MEMBRO3X process are 15 to 60 m² per cubic meter of treated water per hour, which aligns with typical membrane-based filtration systems. This suggests that the MEMBRO3X process is a practical solution for effective micropollutant abatement with minimized bromate formation.
29 May 2025 in Chemical Engineering Science
19 November 2025 in Chemical Engineering & Technology
This study presents the hydrodynamic behavior of a dual‐stage stirred tank, which is typically used in bioprocesses and is equipped with a Rushton turbine (RT) below and a pitched blade turbine (PBT) above. The investigation of the turbulent flow is based on numerical simulations (computational fluid dynamics, CFD) and experiments (particle image velocimetry, 2D–2C PIV). Direct CFD–PIV comparisons in dual‐impeller tanks are rare. The velocity and turbulent kinetic energy vertical profiles show a high degree of agreement between the CFD and PIV data across the entire tank at 250 rpm. The power consumption calculated by CFD for the RT accounts for 78 % of the global power number. CFD post‐processing confirms the presence of a pair of trailing vortices behind the RT only, with local velocities exceeding the tip speed.
24 June 2026 in SSRN Electronic Journal
A synergic integration of Anaerobic Digestion (AD) and Biological Methanation (BM) was investigated through modeling and simulation to enhance overall energy efficiency and methane production, and to identify operating and design conditions enabling a thermally self-sufficient integrated process.The simulation framework combines a multicompartment thermal model for predicting the actual heat demand of an industrial-scale agricultural AD plant under real design, operating and meteorological conditions, and a detailed BM process simulation including compressors, gas separation units, heat exchangers and a biomethanation reactor. Two additional scale-dependent models were developed: (a) a model describing two-phase hydrodynamics, reaction kinetics, and gas-liquid mass transfer in a pressurized stirred biological methanation reactor, and (b) a thermal model assessing the feasibility and quantifying the potentials of heat recovery and integration from the reactor equipped with a dimpled-jackets cooling system.Based on the predicted operation and energy requirements of an industrial-scale AD plant producing 470 Nm³.h-1 of biogas, several BM scale-up scenarios were evaluated by directing 10-50% of the AD off-gas CO2 to biological methanation. The results show that integrating BM with AD reduced biogas self-consumption from 7% to zero, achieving thermal autarky when only 26% of the off-gas CO₂ was upgraded, while increasing methane production by 23%. Under these conditions, a maximum global energy efficiency of 59% was obtained, with a CO2-to-methane conversion of 96% in the BM reactor operating at 13 bar et 63 °C. Hydrogen production remained the dominant contributor to electrical energy consumption, reaching 3.7 kWh per Nm3 of total methane valorized.