Liquid-solid contact electrification is a useful mechanism to harvest wasted micromechanical energy. In this study, we investigate how the surface properties of a solid substrate affect contact electrification efficiency. Substrate surfaces were modified from hydrophilic to hydrophobic by changing the density of self-assembled monolayers (SAMs) on a SiO2 surface. A substrate with a partially-covered SAM exhibited superior performance. The partially-covered SAM substrate is hydrophobic enough to induce quick dewetting of water from the surface and sufficiently electronegative to induce a high charge density on the surface. The quick dewetting results from the aliphatic tail groups of the SAM and -OH groups make the SiO2 surface electronegative; these two competing properties can be simultaneously obtained by optimizing the SAM density. Our findings contribute to the understanding of contact electrification in liquid-solid-type energy-harvesting devices and advance the strategies to maximize the electrification efficiency by optimizing surface geometries and properties.
Two-dimensional (2D) nanoparticles in an oligomer-tethered alpha zirconium phosphate (αZrP) colloid self-assemble to form a cofacial lamellar structure with regular spacing parallel to the surface and exhibit high reflectance and vivid structural colors within the visible frequency spectrum. Here, we demonstrate electrical switching of the structural color reflection by electrical control of the liquid crystalline phase of the αZrP colloid. At low frequency (less than 15 Hz, optimally at 1 Hz), electrohydrodynamic flow in the colloid destroys the photonic crystalline lamellar phase and creates an apparently disordered dynamic state with local nematic orientation. The method using electrohydrodynamic flow is a better approach to erase the photonic crystalline ordering of nanoparticles, than application of a high-frequency field, which has been proposed previously, in terms of the required voltage and color uniformity. The field-induced disordered particle orientation can be spontaneously recovered to the initial photonic crystal state by removing the applied voltage, but this method requires quite a long time and does not work in materials with a high nanoplatelet concentration. On the other hand, by applying a horizontal high-frequency field (approximately 10 kHz), the initial lamellar ordering can be forcibly recovered. In this way, the structural color in the 2D nanoparticle colloid can be repeatedly erased or rewritten by switching the frequency of the applied voltage from 10 kHz to 1 Hz and vice versa, respectively. Our method of switching a 2D colloid using both electrohydrodynamic flow and frequency modulation is expected to be a promising approach to control the photonic crystallinity of colloidal photonic crystals.
Electrowetting (EW) enables facile manipulation of a liquid droplet on a hydrophobic surface. In this study, manipulation of an electrolyte droplet having a small floating object on it was investigated on a solid hydrophobic substrate under the EW process. Herein, the floating object exhibited a vertical motion under an applied electric field owing to the spreading and contraction of the droplet on its connecting substrates. The field-induced height variation of the floating object was significantly influenced by the thicknesses of the dielectric and hydrophobic materials. A small mass was also placed on the top floating object and its effect on the spreading of the droplet was observed. In this system, the height of the top floating object is precisely controllable under the application of an electric voltage. The proposed system is expected to be highly useful in the design of nano- and micro-oscillatory systems for microengineering.
27 October 2017 in Journal of Materials Chemistry A
Chen et al. suggested a skin-contact type triboelectric energy harvesting device [Chen et al., J. Mater. Chem. A, 2017, 5, 12361], which can give a rise to an electrostatic charge issue adversely affecting a person's physical experience. Here we show that adoption of a higher ranking triboelectric material than skin on the positive electrode and size optimisation of the two electrodes can ensure both high power generation and resolution of the electrostatic charge issue.