This paper presents a Vehicle-Platoon-Aware Bi-Level Optimization Algorithm for Autonomous Intersection Management (VPA-AIM) to coordinate the merging of Connected and Automated Vehicles at unsignalized intersections. The constraint-coupled bi-level optimization is operated within a rolling horizon to balance traffic performance and computational efficiency. In each decision step, the platoon formation scheme is incorporated into an upper-level traffic scheduling model as decision variables to pursue an optimal schedule from a systemic view. Meanwhile, the passing sequence and timeslots of vehicles are jointly optimized with the platoon configuration scheme by virtue of real-time traffic states to improve operational efficiency and fairness. After that, a lower-level trajectory planning model will generate dynamically-feasible and energy-efficient trajectories according to the given schedule and coupling constraints with the objective of improving space utilization to prevent spillbacks. Moreover, the quantifiable connection between the makespan of traffic scheduling schemes and the occurrence of spillbacks is established, demonstrating that the cooperative platoon formation strategy is effective in avoiding and mitigating spillbacks in normal and saturated traffic states. Additionally, the proposed algorithm can be extended to mixed traffic scenarios. Numerical experiments are conducted on extensive scenarios with different arrival flows, where the Constraint Programming technique is employed to produce the optimal schedule. Experimental results indicate the superiority of the proposed approach in optimality and stability with reasonable sub-second computation time for real-life applications.
8 November 2024 in IEEE Transactions on Intelligent Transportation Systems
High-speed cruising scenarios with mixed traffic greatly challenge the road safety of autonomous vehicles (AVs). Unlike existing works that only look at fundamental modules in isolation, this work enhances AV safety in mixed-traffic high-speed cruising scenarios by proposing an integrated framework that synthesizes three fundamental modules, i.e., behavioral decision-making, path-planning, and motion-control modules. Considering that the integrated framework would increase the system complexity, a bootstrapped deep Q-Network (DQN) is employed to enhance the deep exploration of the reinforcement learning method and achieve adaptive decision making of AVs. Moreover, to make AV behavior understandable by surrounding HDVs to prevent unexpected operations caused by misinterpretations, we derive an inverse reinforcement learning (IRL) approach to learn the reward function of skilled drivers for the path planning of lane-changing maneuvers. Such a design enables AVs to achieve a human-like tradeoff between multi-performance requirements. Simulations demonstrate that the proposed integrated framework can guide AVs to take safe actions while guaranteeing high-speed cruising performance.
21 July 2025 in IEEE Transactions on Intelligent Transportation Systems
A critical aspect of safe and efficient motion planning for autonomous vehicles (AVs) is to handle the complex and uncertain behavior of surrounding human-driven vehicles (HDVs). Despite intensive research on driver behavior prediction, existing approaches often overlook the interactions between AVs and HDVs, assuming that HDV trajectories are not influenced by AV actions. To address this gap, we present a transformer-transfer learning-based interaction-aware trajectory predictor for safe motion planning in autonomous driving, focusing on a vehicle-to-vehicle (V2V) interaction scenario involving an AV and an HDV. Specifically, we construct a transformer-based interaction-aware trajectory predictor using widely available datasets of HDV trajectory data and further transfer the learned predictor using a small set of AV-HDV interaction data. Then, to better incorporate the proposed trajectory predictor into the motion planning module of AVs, we introduce an uncertainty quantification method to characterize the predictor’s errors, which are integrated into the path-planning process. Our experimental results demonstrate the value of explicitly considering interactions and handling uncertainties.
1 September 2018 in Transportation Research Part C: Emerging Technologies
This paper proposes a novel approach to integrate optimal control of perimeter intersections (i.e. to minimize local delay) into the perimeter control scheme (i.e. to optimize traffic performance at the network level). This is a complex control problem rarely explored in the literature. In particular, modeling the interaction between the network level control and the local level control has not been fully considered. Utilizing the Macroscopic Fundamental Diagram (MFD) as the traffic performance indicator, we formulate a dynamic system model, and design a Model Predictive Control (MPC) based controller coupling two competing control objectives and optimizing the performance at the local and the network level as a whole. To solve this highly non-linear optimization problem, we employ an approximation framework, enabling the optimal solution of this large-scale problem to be feasible and efficient. Numerical analysis shows that by applying the proposed controller, the protected network can operate around the desired state as expressed by the MFD, while the total delay at the perimeter is minimized as well. Moreover, the paper sheds light on the robustness of the proposed controller. This multi-scale hybrid controller is further extended to a stochastic MPC scheme, where connected vehicles (CV) serve as the only data source. Hence, low penetration rates of CVs lead to strong noises in the controller. This is a first attempt to develop a network-level traffic control methodology by using the emerging CV technology. We consider the stochasticity in traffic state estimation and the shape of the MFD. Simulation analysis demonstrates the robustness of the proposed stochastic controller, showing that efficient controllers can indeed be designed with this newly-spread vehicle technology even in the absence of other data collection schemes (e.g. loop detectors).Comment: Accepted by ISTTT 2017 (International Symposium on Transportation & Traffic Theory
1 November 2018 in Transportation Research Part C: Emerging Technologies