A novel type of partitioned stator switched flux permanent magnet (PS-SFPM) machine with either single-layer or double-layer windings is developed in this paper. The proposed PS-SFPM machines have two stators, which separately accommodate the armature windings and the PMs, and between which is the rotor made of iron pieces, while the number of stator poles with PMs may be equal or half of that with armature windings. All the machines are optimized under fixed copper loss for maximum average torque by genetic algorithm. Their electromagnetic performances are compared, such as open-circuit flux-linkages and back-electromotive forces (EMFs), cogging torque, static torque waveforms, average torque against current, PM utilization ratio, and flux-weakening performances. The results show that due to more PM usage and higher open-circuit back-EMF, the PS-SFPM machines having the number of stator poles with PMs the same as that with armature windings exhibit higher average torque, irrespective of the winding topologies, either single-layer or double-layer windings. However, the single-layer winding PS-SFPM machines having the number of stator poles with PMs half of that with armature windings have the best PM usage and the highest ratio of average torque to PM volume, as well as good flux-weakening capability. A prototype machine is manufactured and tested to validate the analyses.
In this study, the analytical design and electromagnetic performance comparison of a squirrel-cage induction motor (SCIM) and a wound-field flux switching motor (WFFSM) for high-speed brushless industrial motor drives is undertaken for the first time. The study uses analytical sizing techniques and finite element analysis (FEA) to model and predict the performance of both motors at a 7.5 kW output power. This study includes detailed equations and algorithms for sizing and modeling of both types of motors, as well as performance calculations that aid in motor selection, design optimization, and system integration. The main findings show that the SCIM has superior torque performance for starting and overload conditions, while the WFFSM offers advantages in power factor, efficiency over a wide operating range, and potential for higher peak power output. To this end, the WFFSM is capable of high-speed and high-efficiency operation while the SCIM is suitable for applications requiring variable speed operation. The validation study shows good agreement between analytical and FEA calculations for both motors. The results provide insights into the design and performance characteristics of both motors, enabling researchers to explore innovative approaches for improving their efficiency, reliability, and overall performance.
7 March 2016 in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
Purpose: – The purpose of this paper is to propose a novel type of switched flux PM machines with two separate stators. Design/methodology/approach: – 2D-FEA is employed to analyze the electromagnetic performance of the proposed machines. Moreover, the results are validated by experiments. Findings: – The proposed machine has higher torque density, less unbalanced magnetic force on the modulating steel piece and uses less PM volume. Originality/value: – The proposed machine is a low-cost novel topology with different rotor pole combinations.
Due to the high price of rare-earth magnets, it is pertinent to develop high torque density permanent magnet (PM) machines with reduced magnet volume, which is the main purpose of this paper. This paper proposes novel high torque density magnetically-geared switched flux permanent magnet machines in which the stator is partitioned into two stators but with armature windings and PM excitations separately on each stator whilst the number of rotor segmented iron pieces is approximately twice or equal to the number of the stator teeth / poles. Therefore, the developed machines are double stator / single rotor machines. The armature outer stator is equipped with concentrated non-overlapping winding and identical to the stator of a fractional-slot PM machine, whilst the structure of the inner excitation stator has interior PMs with flux focusing, but structurally identical to the rotor of a conventional interior PM machine. The influence of design parameters is investigated at a fixed copper loss by a 2-dimensional finite element analysis method. Furthermore, the effect of different rotor and stator pole combinations is also analysed in detail. The electromagnetic performance of the proposed machines show that the odd rotor pole number machines are potentially better in terms of high torque and low torque ripple compared to the equivalent even rotor pole number machines under the same condition, albeit with potential unbalanced magnetic force which may be eliminated by doubling the stator and rotor pole numbers. Finally, the predicted electromagnetic performances of the proposed machines are validated by experiments on the fabricated prototype.
In this paper, the electromagnetic performance of partitioned stator switched flux permanent magnet (PM) (PS-SFPM) machines with single- and double-layer windings are compared when the inner stator is equipped with the same number or half the number of PMs as that of the outer stator teeth. Electromagnetic performance of these PS-SFPM machines is investigated by 2-dimensional finite element analysis (FEA), based on the globally optimized designs for the maximum average electromagnetic torque. FEA results show that for 12-outer-stator-tooth and 12-inner-stator-PM PS-SFPM machines the double-layer windings produce higher torque than the single-layer windings, but for 12-outer-statortooth and 6-inner-stator-PM PS-SFPM machines it is opposite, i.e. the double-layer windings produce less torque than the single-layer windings. Overall, the 12-outer-stator-tooth and 12-inner-stator-PM PS-SFPM machines produce higher torque and less torque ripple than the 12-outer stator-tooth and 6-inner stator-PM PS-SFPM machines.