Ivan Panchenko

Ivan Panchenko

Auto-generated profile, based on publicly available information

Ivan Panchenko

Department of Nanotechnology and Microsystems, Southern Federal University, Taganrog, 347928, Russia

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 December 2018 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
NSNikita Shandyba
Nikita Shandyba
IPI V Panchenko
I V Panchenko
RTRoman Viktorovich Tominov
Roman Viktorovich Tominov
Vladimir SmirnovVladimir Smirnov
Vladimir Smirnov
MPM I Pelipenko
M I Pelipenko
YCY H Chu
Y H Chu
Size effect on memristive properties of nanocrystalline ZnO film was investigated. It was shown, ZnO film thickness increase from 6.23±1.54 nm to 47.60±8.12 nm leads to high-resistance state (HRS) increase from 3.26±2.14 MΩ to 700.32±300.83 MΩ and low-resistance state (LRS) from 0.03±0.02 MΩ to 0.09±0.03 MΩ, respectively. The HRS/LRS ratio increases from 108 to 7742. The results can be useful for based on nanocrystalline ZnO films resistive synaptic devices manufacturing.

14 November 2018 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
AKA S Kolomiytsev
A S Kolomiytsev
NSNikita Shandyba
Nikita Shandyba
IPI V Panchenko
I V Panchenko
SLS A Lisitsyn
S A Lisitsyn
The results of an experimental study of the fabrication of probe tips for scanning near-field optical microscopy (SNOM) using the focused ion beam (FIB) milling and ion beam induced deposition are presented. Methods of the FIB local milling and FIB-induced deposition of tungsten and carbon onto the tip of an atomic force microscope (AFM) probe are studied. In this work, a technique for the formation of AFM probes based on the use of a combination of ion-beam etching and ion-induced carbon deposition was developed. Based on the developed technique, several aperture probes for SNOM with an aperture diameter of 50, 150, and 200 nm, an apex height of about 20 nm, and a cone angle of about 35° were fabricated. The paper presents that the formation of SNOM probes by FIB-induced deposition allows creating a high efficiency tool for nanodiagnostics. The obtained results can be used to develop technological processes for the fabrication of specialized AFM probes and procedures for the express monitoring of technological process parameters in the manufacturing of the elements for micro- and nanoelectronics.

15 January 2019 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
PDF file
IPIvan Panchenko
Ivan Panchenko
NSNikita Shandyba
Nikita Shandyba
AKAlexey Kolomiytsev
Alexey Kolomiytsev
AGAlexandr Gromov
Alexandr Gromov
Oleg A. AgeevOleg A. Ageev
Oleg A. Ageev
In this paper, we present the results of an experimental study of the processes of local profiling of a material surface by a focused ion beam. The regularities of the influence of the main technological parameters of etching by the FIB method on the surface roughness of the substrate were established experimentally. It was revealed that the main factors affecting the formation of the surface relief of a solid when etched by a focused ion beam are: FIB overlap, the beam dwell time, and the ion beam current. It is shown that when the overlap is about 30-50%, the substrate roughness is minimal, and the FIB current and the beam dwell do not exert a determining influence on the roughness. The obtained results can be used to develop technological processes for the fabrication of the structures and elements for micro- and nanoelectronics.