With the increased interest in silicon photonics, integration and packaging technologies are essential to transforming photonic integrated circuits (PICs) into functional photonic systems. We describe in detail the process to obtain a fully packaged miniature photonic temperature sensor starting from bare PIC dies having Bragg grating sensors in a silicon waveguide. It is also shown that PICs fabricated via multiproject wafer services can show some variability, e.g., in the effective index, which has significant impact on the device functionality (Bragg wavelength) and optical interface (red-shifted grating coupler spectra at default coupling angles). To obtain a final sensor device that is as small as possible the PIC is interfaced from the back side using a 300 μm ball lens. Furthermore, this ensures that the top surface remains clear of any interfacing fibers. Based on this optical interfacing concept, we developed a solution for integrating a 1 mm × 1 mm sensor PIC with a single-mode fiber and packaging it in a 1.5 mm inner-diameter metal protective tube. The accurate position of the ball lens is ensured using a laser-fabricated fused silica precision holder. It is shown that the additional insertion loss caused by the ball lens interface is very limited. A packaged sensor was achieved by sequentially mounting the holder on a ceramic ferrule and then the PIC on the holder and finally gluing a protective metal tube surrounding the assembly, taking care that the PIC surface is flush with the end face of the tube. We demonstrated this concept by realizing a packaged phase-shifted silicon Bragg grating temperature sensor operating around 1550 nm, which could be read out in reflection using a commercial interrogator. A temperature sensitivity of 73 pm / ° C was found, and we demonstrated sensor functionality up to 180°C.
4 November 2025 in Journal of Reinforced Plastics and Composites
The cure stage of thermosetting composites production is critical for the overall process duration and manufacturing costs. While process simulations are commonly used to estimate cure behaviour, real-time predictive capabilities in resin transfer moulding (RTM) remain limited, primarily due to the computational cost of finite element (FE) methods. To address this gap and accurately estimate cure process parameters in RTM, this study proposes a surrogate cure simulation approach based on two state-of-the-art machine learning (ML) voting ensemble models – XGBoost and Light Gradient Boosting Machine – designed to predict cure time and temperature overshoot. To train the model, the cure of an epoxy/carbon fibre flat plate was simulated using the FE solver Marc, providing data over a wide range of conditions. The predictions of temperature overshoot and cure time demonstrate remarkable consistency and high accuracy (R 2 values up to 98%) with execution times under 30 ms for both variables. Performance was validated against unseen simulation data and further verified through RTM manufacturing trials and differential scanning calorimetry (DSC), confirming cure completion and a final glass transition temperature of 191°C–194°C. Unlike existing studies that remain simulation-focused, this approach bridges process simulation and data-driven modelling, offering a practical tool for real-time optimisation in industrial RTM applications.
23 May 2025 in IEEE Transactions on Instrumentation and Measurement
Carbon fiber-reinforced composites have become a staple in the aerospace industry, owing to their mechanical properties (low weight and mechanical stability). Resin transfer molding (RTM) is a manufacturing process for composite materials, offering significant cost reduction, compared to autoclave processes. To achieve the desired quality though, strict control of several process conditions is required. Monitoring the temperature and pressure conditions inside the tool along with the resin’s refractive index (RI) (monitoring its cure state), can provide tight control over the curing cycle. Leveraging silicon photonics advantages (electrically passive and stable at high temperatures) can enable accurate tracking of the resin curing conditions. In this work, the first demonstration of silicon photonic sensors in the production of composite parts is presented. The sensors’ high thermo-optic sensitivity (78.4 pm/°C) and linearity (0.9787) are leveraged, while being deployed inside a multiton composite tool. The devices are demonstrated under demanding temperature (up to $165~^{\circ }$ C) and pressure (7 bar) conditions, during a 6-h production cycle, compatible with an RTM-6 (aerospace-grade RTM) process. It shows highly stable performance across the full dynamic range ($30~^{\circ }$ C–$165~^{\circ }$ C), accurately monitoring the cure state of the resin.
30 October 2026 in IEEE Photonics Technology Letters
Carbon fiber reinforced composites are widely used in aerospace due to their low weight and high mechanical strength. Resin Transfer Molding (RTM) offers a cost-effective alternative to autoclave-based manufacturing but requires strict control over process parameters. Accurate monitoring of temperature, pressure, and the resin’s refractive index—key to assessing cure state—is essential for ensuring quality. This study introduces the first application of silicon photonic sensors in composite part manufacturing, leveraging their electrical passivity and thermal stability. Embedded in a multi-ton composite tool, the sensors—with a high thermo-optic sensitivity of 78.4 pm/°C and a linearity of 0.9787—operated under demanding RTM-6 conditions (up to 165 °C and 7 bar over six hours). Across the full temperature range (30–165 °C), they exhibited exceptional stability, enabling precise cure-state monitoring.