31 March 2021 in ACS Applied Materials & Interfaces
1 March 2021 in Review of Scientific Instruments
This paper reports the experimental, analytical, and numerical study of resistive-nanoindentation tests performed on gold samples (bulk and thin film). First, the relevant contributions to electrical contact resistance are discussed and analytically described. A brief comparison of tests performed on gold and on natively oxidized metals highlights the high reproducibility and the voltage-independence of experiments on gold (thanks to its oxide-free surface). Then, the evolution of contact resistance during nanoindentation is fully explained in terms of electronic transport regimes: starting from tunneling, electronic transport is then driven by ballistic conduction before ending with pure diffusive conduction. The corresponding analytical expressions, as well as their validity domains, are determined and compared with experimental data, showing excellent agreement. From there, focus is made on the diffusive regime. Resistive-nanoindentation outputs are fully described by analytical and finite-element modeling. The developed numerical framework allows a better understanding of the main parameters: it first assesses the technique capabilities (validity domains, sensitivity to tip defect, sensitivity to rheology, effect of an oxide layer, and so on), but it also validates the different assumptions made on current line distribution. Finally, it is shown that a simple calibration procedure allows a well-resolved monitoring of the contact area during resistive-nanoindentation performed on samples with complex rheologies (ductile thin film on an elastic substrate). Comparison to analytical and numerical approaches highlights the strength of resistive-nanoindentation for continuous area monitoring.
1 October 2021 in Thin Solid Films
12 May 2025 in Journal of Applied Physics
Ge-rich Ge–Sb–Te alloys exhibit a high (>350 °C) crystallization temperature, which is compatible with applications requiring a high thermal stability such as the use of non-volatile memories in cars. As the composition of these alloys does not correspond to any stable crystalline phase, crystallization from the amorphous phase is accompanied by phase separation (Ge2Sb2Te5 + Ge). The complexity of the elemental processes associated with this multiphase amorphous-to-crystal transition calls for in-depth materials studies. In this work, we focus on the influence of a thin (5 nm) underlayer (Ge2Sb2Te5 or Sb2Te3) on the crystallization of a Ge-rich Ge–Sb–Te alloy. Using in situ synchrotron x-ray diffraction, we demonstrate that the underlayers facilitate crystallization by decreasing crystallization temperature and suppressing incubation time. These results are interpreted in the framework of classical nucleation theory and are supported by crystallographic texture measurements, which evidence ⟨111⟩ fiber texture in the crystallized cubic Ge2Sb2Te5, particularly marked in the case of an Sb2Te3 underlayer. These results bear important consequences for the cycling of memory cells based on these materials.
21 February 2026 in Journal of Materials Research and Technology
8 June 2024 in Physica Status Solidi (RRL) – Rapid Research Letters
Ge‐rich Ge–Sb–Te alloy is a good candidate for future automotive applications due to its high crystallization temperature, which allows good data retention at elevated temperatures. Crystallization in this material is governed by elemental segregation which is key to thermal stability and device performance. In this work, elemental (Ge, Sb, Te) segregation is studied in situ during thermal annealing of Ge‐rich Ge–Sb–Te thin films using X‐ray fluorescence microscopy at ID16B beamline of ESRF with a beam size of 50 nm. Spatially resolved maps of Ge, Te, and Sb fluorescence yield are monitored and statistically analyzed as a function of temperature/time. In all investigated samples Sb appears to segregate much less than Te and Ge, indicating a lower mobility of this element. In situ, fluorescence mapping of samples doped with different amounts of carbon by ion implantation shows that carbon delays Ge and Te segregation to higher temperatures. Comparison with crystallization kinetics monitored by X‐ray diffraction shows a good correlation between the occurrence of spatially resolved chemical inhomogeneities and the appearance of crystallized phases.