23 August 2022 in Optics & Laser Technology
3 November 2022 in Optics & Laser Technology
9 February 2022 in IEEE Sensors Journal
We proposed and experimentally investigated the torsion sensing performance of tilted long period gratings (TLPG) based on eccentric dual core fiber (EDCF). The EDCF is composed of a centric core and an eccentric core with a large separation. The asymmetrical structure of the EDCF and the high refractive index modulation of TLPG can bring some directional and sensitivity advantages to structure. We tested the torsional sensing in two optical channels of EDCF with different grating parameters and found both cores of EDCF can recognize the torsion direction. When the tilt angle of the TLPG is 80°, the maximum torsional sensitivity of the centric core and eccentric core are −0.381 nm/(rad/m) and 0.812 nm/(rad/m), respectively, which are 7 times and 16 times higher than similar TLPG inscribed in normal single mode fiber. In this condition, this sensor has good structural stability and high torsion sensitivity, and has great potential in multi-channel sensing applications.
3 December 2023 in Optical Fiber Technology
31 December 2025 in Laser & Photonics Reviews
22 July 2025 in Journal of Lightwave Technology
We theoretically investigate the mode-dependent gain (MDG) in coupled multi-core erbium-doped fiber amplifiers (MC-EDFAs) with inter-core doping concentration discrepancy (ICDCD). The MDGs for both 2-core and 4-core EDFAs with ICDCD under varying bending and twisting conditions are calculated. Simulation results indicate that the ICDCD in a non-twisted, bent coupled MC-EDFA results in a specific bending orientation that reduces the MDG to a value lower than it would be in the absence of ICDCD. We also explore the cumulative effect of bending and twisting on the MDG of coupled MC-EDFAs with ICDCD along the propagation distance under small-signal gain conditions. Random twisting perturbations make the root-mean-square (RMS) of MDG proportional to the square root of fiber length due to random mode coupling, differing from the case without them, where the MDG approximately grows linearly with fluctuations as the fiber length increases. Due to the presence of twisting, ICDCD generally exhibits a deteriorating effect on MDG. However, simulation results demonstrate that for coupled MC-EDFA with ICDCD under various coupling coefficient conditions, an optimal bending radius can be determined to minimize the RMS of MDG. The findings presented in this work will contribute to the understanding of the gain characteristics in coupled MC-EDFA.