28 June 2016 in Journal of Fluid Mechanics
Channel bifurcations are a fundamental element of a broad variety of flowing freshwater environments worldwide, such as braiding and anabranching rivers, river deltas and alluvial fans. River bifurcations often develop asymmetrical configurations with uneven discharge partition and a bed elevation gap between the downstream anabranches. This has been reproduced by one-dimensional (1-D) analytical theories which, however, rely on the empirical calibration of one or more parameters and cannot provide a clear and detailed physical explanation of the observed dynamics. We propose a novel two-dimensional (2-D) solution for the flow and bed topography in channel bifurcations based on an innovative application to a multi-thread channel configuration of the 2-D steady linear solution developed decades ago to study river bars and meandering in single thread river settings. The resonant value of the upstream channel aspect ratio, corresponding to the theoretical resonance condition of regular river meanders (Blondeaux & Seminara,J. Fluid Mech., vol. 157, 1985, pp. 449–470) is the key parameter discriminating between symmetrical and asymmetrical bifurcations, in quantitative agreement with experimental observations and numerical simulations, and qualitatively matching field observations. Only when the aspect ratio of the upstream channel of the bifurcation exceeds resonance, is the bifurcation node able to trigger the upstream development of a steady alternate bar pattern, thus creating an unbalanced configuration. Ultimately, the work provides an analytical explanation of the intrinsic legacy between bifurcation asymmetry and the phenomenon of 2-D upstream morphodynamic influence discovered by Zolezzi & Seminara (J. Fluid Mech., vol. 438, 2001, pp. 183–211).
4 December 2018 in Earth Surface Processes and Landforms
23 September 2020 in Earth Surface Dynamics
The formation of alternate bars in straightened river reaches represents a fundamental process of river morphodynamics that has received great attention in the last decades. It is well-established that migrating alternate bars arise from an autogenic instability mechanism occurring when the channel width-to-depth ratio is sufficiently large. While several empirical and theoretical relations are available for predicting how bar height and length depend on the key dimensionless parameters, there is a lack of direct, quantitative information about the dependence of bar properties on flow discharge. We performed a series of experiments in a long, mobile-bed flume with fixed and straight banks at different discharges. The self-formed bed topography was surveyed, different metrics were analyzed to obtain quantitative information about bar height and shape, and results were interpreted in the light of existing theoretical models. The analysis reveals that the shape of alternate bars highly depends on their formative discharge, with remarkable variations in the harmonic composition and a strong decreasing trend of the skewness of the bed elevation. Similarly, the height of alternate bars clearly decreases with the water discharge, in quantitative agreement with theoretical predictions. However, the disappearance of bars when discharge exceeds a critical threshold is not as sharp as expected due to the formation of so-called “diagonal bars”. This work provides basic information for modeling and interpreting short-term morphological variations during individual flood events and long-term trajectories due to alterations of the hydrological regime.
23 May 2016 in Water Resources Research
Understanding the role of external controls on the morphology of braided rivers is currently limited by the dearth of robust metrics to quantify and distinguish the diversity of channel form. Most existing measures are strongly dependent on river stage and unable to account for the three‐dimensional complexity that is apparent in digital terrain models of braided rivers. In this paper, we introduce a simple, stage‐independent morphological indicator that enables the analysis of reach‐scale regime morphology as a function of slope, discharge, sediment size, and degree of confinement. The index is derived from the bed elevation frequency distribution and characterizes a statistical width‐depth curve averaged longitudinally over multiple channel widths. In this way, we define a “synthetic channel” described by a simple parameter that embeds information about the river morphological complexity. Under the assumption of uniform flow, this approach can be extended to provide estimates of the reach‐averaged shear stress distribution, bed load flux, and at‐a‐station‐variability of wetted width. We test this approach using data from a wide range of labile channels including 58 flume experiments and three gravel bed braided rivers. Results demonstrate a strong relationship between the unit discharge and the shape of the elevation distribution, which varies between a U shape for typical single‐thread confined channels and a Y shape for multithread reaches. Finally, we discuss the use of the metric as a diagnostic index of river condition that may be used to support inferences about the river morphological trajectory.
20 January 2021 in Water Resources Research
Multithread fluvial environments like anastomosing and braided rivers are fundamentally directed by the continuous concatenation of channel bifurcations and confluences, which distribute flow and sediment among different branches that are reconnecting further downstream. A large number of theoretical, experimental, and numerical studies conducted in the last two decades have provided a clear picture of stability conditions for river bifurcations. However, most analyses are focused on the dynamics of bifurcations alone, ignoring the possible mutual interaction with downstream confluences. In this work, we study the morphodynamic equilibrium and stability conditions of a bifurcation‐confluence loop, where flow splits in two secondary anabranches that rejoin after a prescribed distance. Through the formulation of a novel theoretical model for mobile bed confluences, we show that the dominating anabranch (i.e., that carrying most discharge) is subject to an increase of the water surface elevation that is proportional to the square of the Froude number. This effect causes a decrease of the slope of the dominating anabranch, which acts as a negative feedback that increases the stability of the bifurcation‐confluence system. A linear analysis of the coupled model reveals that the stabilizing effect exerted by the confluence depends on the ratio between the length of the anabranches and the average water depth, independently of channel slope and Froude number. Ultimately, this effect is potentially able to stabilize the loop even when the sediment is mainly transported in suspension, a condition which makes the classic stabilizing mechanism (i.e., the topographic effect at the bifurcation node) practically ineffective.
16 July 2021 in Water Resources Research
Migrating bars are large‐scale, alternate bedforms that often develop in channelized river reaches, as a consequence of an intrinsic instability of the erodible channel bed. Their behavior under steady flow conditions has been widely investigated by means of theoretical, experimental, and numerical models, which revealed that bar formation occurs when the width‐to‐depth ratio of the channel exceeds a critical threshold value. Conversely, no much information is available about the long‐term, average characteristics of alternate bars in the case of a complex flow regime, which makes the width‐to‐depth ratio highly variable in time. Starting from the state‐of‐the‐art theoretical models of bar dynamics, we propose a novel methodology to determine the long‐term bar response to the hydrological river regime and the associated “bar‐forming” discharge that, if applied steadily, would produce the same morphological response. We derive a generalized criterion to define whether bars are expected to form and to estimate the long‐term bar topography, depending on flow probability density function and channel characteristics (width, slope and sediment size). Our procedure differs from the classical methods to define formative discharge, inasmuch as it accounts for the specific and reversible response of bar topography to the different flow stages that compose the hydrological regime. Application to four different gravel bed reaches in the Alpine region shows the capability of the procedure to interpret remarkably different riverbed morphologies and to provide a reasonable prediction of the observed bar height, thus suggesting its potential to analyze long‐term morphological trajectories following hydrological alterations and river restoration projects.