This article presents a wireless high-voltage power supply (WHPS) that leverages MHz wireless power transfer (WPT) technology with the double-sided LCC compensation topology, achieving high-voltage, high-isolation, high-efficiency, and high-power-density performance. The design utilizes magnetic resonant WPT for primary and secondary side isolation and incorporates multiple receiving coils on the secondary side. Rectifying each coil separately generates multiple direct current (dc) voltages, which are connected in series to produce high voltage output. To attain high power density, stacking of receiving coils and integration of compensation inductors are implemented. However, due to the close proximity of these components, strong coupling results in both mutual inductance and parasitic capacitance. A compensation parameter design method is proposed to decouple mutual inductance and ensure resonant and voltage equalization across each stage. The spatial structures of the coils and inductors are also specifically designed to mitigate the impact of parasitic capacitance, enabling the system's resonant frequency to be elevated to MHz levels. Finally, an 800 W/1.875 MHz WHPS prototype was design and fabricated. Experimental results show that the prototype is capable of converting a 150 V input into a 10 kV output, while maintaining a dc–dc efficiency exceeding 90% across a wide range of load conditions, from 6% to 100%. Moreover, the developed prototype demonstrates a power density of 3.66 kW/L (60 W/in 3 ) and an electrical insulation performance surpassing 35 kV ac.
13 December 2024 in IEEE Transactions on Industrial Electronics
This article delves into magnetic resonance wireless power transfer (MR-WPT) for room-scale charging of electronic devices, such as laptops and smartphones. A system utilizing multiple large single-turn circular coils is specifically designed, with a focus on optimizing resonant frequency and coil current to maximize electromagnetic (EM) power flow within exposure constraints defined by the International Commission on Nonionizing Radiation Protection guidelines (2020), ensuring compliance with EM safety standards. To mitigate electric field effects, a novel approach employing capacitor-distributed compensation and parallel excitation for each coil is introduced. A compensation parameter design method is proposed to achieve uniform current distribution across coils, especially in high cross-coupling conditions. The system's EM safety is evaluated through finite element analysis of specific absorption rates (SAR) and spatial EM field in various scenarios. Additionally, the EM field was experimentally tested, and both simulations and experiments analyzed the thermal effects on metallic objects. A cylindrical room model (3 m diameter, 2.4 m height, 17 m³ space) is constructed for system testing. Results demonstrate the system's capability to transfer over 100 W of power at 46% efficiency using an iPad-sized receiver, and transfer 375 W at 70% efficiency with three receivers operating concurrently. In the typical space for electronic device usage, a single receiver maintains a power transmission of 40 W.