Yusuf Eren Erdoğdu

Yusuf Eren Erdoğdu

Auto-generated profile, based on publicly available information

Yusuf Eren Erdoğdu

Malatya , Turkey

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2021 in Materials Testing
Verified
Journal Article
Open access
YEYusuf Eren Erdoğdu
Yusuf Eren Erdoğdu
EKEngin Eren Korkmaz
Engin Eren Korkmaz
ŞTŞemsettin Temiz
Şemsettin Temiz
In this study, the mechanical properties of plain woven jute-epoxy composite materials were investigated after filling graphene nanoplatelets (GNPs) in different proportions. The time dependent changes in the viscosity and temperature of unfilled epoxy resin, with 0.5, 1 and 2 wt.-% graphene nanoplatelets filled epoxy resins were observed. Woven jute reinforced unfilled, 0.5 wt.-% GNPs filled and 1 wt.-% GNPs filled epoxy composite plates were produced by using vacuum assisted resin transfer molding (VARTM) at the same waiting and processing times. Specimens were prepared and subjected to tensile and flexural tests according to ASTM D 3039 and ASTM D 790 standards, respectively. Images were taken and evaluated with a scanning electron microscope (SEM) in areas where tensile damage occurred. It was observed that the gap amount between the fiber and the matrix increased and the interface adhesion decreased as the fill amount increased in the composites produced. The testing results indicated that the tensile and flexural properties of composites decreased at 0.5 wt.-% and 1 wt.-% during the GNPs loading as compared to unfilled composites.

15 December 2020 in Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Verified
Journal Article
Closed access
PDF file
MUMahir Uzun
Mahir Uzun
YEYusuf Eren Erdoğdu
Yusuf Eren Erdoğdu
Son yıllarda eriyik yığma modellemesi (EYM) ilkeleriyle çalışan 3 boyutlu (3B) yazıcıların kullanımı birçok alanda yaygınlaşmıştır. Bu teknoloji sayesinde başta prototipler olmak üzere karmaşık şekilli parçalar dahi kısa sürede ve hassas şekilde üretilebildiğinden çoğu sektörde araştırma geliştirme (AR-GE) çalışmalarının olmazsa olmazı haline gelmiştir. EYM işlemiyle birlikte çevresel kaygıların da etkisiyle doğada çözünümü kolay olan (biyobozunur) polilaktik asit (PLA) filamentlerin kullanımı önemli hale gelmiştir. Bundan dolayı PLA filamentlere çeşitli takviyeler yapılarak bazı özelliklerinin geliştirilmesi ve kullanımının yaygınlaştırılması önem arz etmektedir. Bu çalışmada da takviyesiz, %20 bakır takviyeli ve %20 karbon-fiber takviyeli PLA kompozitler 3B yazıcı ile üretilmiştir. Üretilen numuneler çekme testine ve üç nokta eğilme testine tabi tutularak mekanik özellikleri kıyaslanmıştır. PLA malzemeye bakır ve karbon fiber takviyeler yapmanın çekme ve eğilme dayanımlarını düşürdüğü görülmüştür.

22 November 2022 in Journal of Natural Fibers
Verified
Journal Article
Open access
YEYusuf Eren Erdoğdu
Yusuf Eren Erdoğdu
ŞTŞemsettin Temiz
Şemsettin Temiz
The properties of natural fibers such as poor ultraviolet (UV) resistance and hydrophilicity that reduce the durability of composites limit their usage as reinforcements in polymer matrix composites. To compensate this, new types of composites are proposed in the present study. The tribological behaviors of multiphase composites with polyaspartic polyurea matrix produced by vacuum assisted resin transfer molding (VARTM) technique with jute reinforced, filled by graphene nanoplatelets (GNPs) and titanium dioxide (TiO2) nano-fillers at high temperatures are investigated. The wear tests were performed under 10, 20, and 30 N loads, at 60% humidity and temperatures of 100°C, 125°C, and 150°C using a heat moduled pin-on-disc tribotester with an AISI 4140 counter-surface disc having an average surface roughness value of 1.033 µm. The tests were carried out under dry friction conditions along 6000 m sliding distance at a sliding speed of 2 m/s. The results show that the wear damage types changed according to the nano-filler type. Wear loss and specific wear rate increased with increasing temperature and load in almost all types of composites. Using nano-filler caused irregularities in the change of the friction coefficient.

1 November 2021 in Materials Testing
Verified
Journal Article
Closed access
UAUğur Avcı
Uğur Avcı
YEYusuf Eren Erdoğdu
Yusuf Eren Erdoğdu
In this study, aluminum Al6013 and copper (Cu) cylindrical bimetal was manufactured by means of an original production method. The optical microscope and scanning electron microscope (SEM) images of the bimetal material produced through this approach, semi-centrifugal compression, were used in microstructural investigations following which metallurgical transition zones were defined. Through an energy dispersive X-ray (EDX) analysis of the defined regions, the chemical content of the regions were determined. Micro hardness values of the regions were determined and comparisons were made with the chemical content and hardness values of the materials used in the bimetal production before the manufacturing process. In addition, the mechanical properties of the materials were compared by applying tensile tests to the bimetallic components Cu and Al6013 and to the bimetal material produced. In the light of the values obtained, the general properties of the bimetal material produced through this new approach were presented.

1 March 2021 in Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Verified
Journal Article
Closed access
PDF file
YEYusuf Eren Erdoğdu
Yusuf Eren Erdoğdu
ŞTŞemsettin Temiz
Şemsettin Temiz
Son yıllarda düşük maliyet, biyobozunurluk, hafiflik gibi özelliklerinden dolayı doğal elyaf takviyeli kompozitler bazı alanlarda sentetik elyaf takviyeli kompozitlere alternatif hale gelmiştir. Bu çalışmada, vakum destekli reçine transfer kalıplama (VDRTK) metodu ile üretilen jüt kumaş takviyeli ve farklı dolgu oranlarında (ağırlıkça % 0, 0.5, 1, 2) grafen nanoplatelet (GNP) dolgusu yapılmış epoksi matrisli kompozitlere abrazif aşınma testleri uygulanmıştır. Tribotestler pim-disk tipi tribotest cihazı kullanılarak 400 grit SiC zımpara kağıdı karşı yüzeyi üzerinde 5 N,10 N ve 15 N yüklerde 1m s-1 kayma hızında ve 200 m kayma mesafesinde gerçekleştirilmiştir. Yapılan testlerde ara yüzey sıcaklığı ve spesifik aşınma oranı değerleri takip edilmiştir. Spesifik aşınma oranının ağırlıkça %1 GNP dolgusunda minimum olduğu ve ara yüzey sıcaklığının genel olarak artan yük ile arttığı görülmüştür.

16 April 2026 in Journal of Composite Materials
Verified
Journal Article
Closed access
YEYusuf Eren Erdoğdu
Yusuf Eren Erdoğdu
ŞTŞemsettin Temiz
Şemsettin Temiz
This work proposes a novel fiber-matrix pair consisting of polyaspartic polyurea (PAPUr) and jute to enhance the sustainability of natural fiber–reinforced polymer composites. The feasibility of producing this fiber-matrix pair using vacuum assisted resin transfer molding (VARTM) method, without the need for additional chemical surface treatment and post-curing processes, is evaluated. Furthermore, the ability to improve the existing mechanical properties of the composite using different nanofillers is investigated. For this purpose, tensile, three-point bending, and unnotched Charpy impact tests were conducted on unfilled composites and composites filled with 0.5, 1, 1.5 wt.% nano titanium dioxide (TiO 2 ) and graphene nanoplatelets (GNPs). The surface hardness of the composites was also examined. TiO 2 nanofiller significantly improved the mechanical performance of the composite, resulting in a 31.28% increase in tensile strength at 1 wt.%, a 20.6% increase in flexural strength at 1.5 wt.%, a 34.2% increase in impact strength, and a 19.68% increase in surface hardness compared to unfilled composites. Conversely, GNPs addition produced modest improvements in tensile strength (17.54% at 0.5 wt.%) and flexural strength (15.54% at 1.5 wt.%), but reduced impact resistance and surface hardness due to agglomeration, poor wetting and void formation related effects.