15 March 2023 in Journal of Building Engineering
1 November 2023 in Physics of Fluids
This study introduces a novel method for imposing wall boundary conditions in smoothed particle hydrodynamics (SPH). SPH is a particle method based on the Lagrangian approach, primarily employed in fluid analysis as a part of numerical computation methods. Due to its ability to discretize space using particles, SPH excels in handling analyses of free surface flow or multiphase flow with intricate boundary surfaces. However, there is a drawback in modeling wall boundaries using particles, as resolving the particle deficiency problem necessitates multi-layered boundary particles to be arranged behind the wall boundary. This leads to difficulties in implementing complex shapes and adds computational expense. To address this issue, this study suggests the use of boundary segments for wall boundary modeling and specifically employs triangular segments for three-dimensional expansions. For robust application of boundary conditions, a method considering both Poisson's equation and geometric configurations is proposed. The proposed method is independent of the segment density, which facilitates efficient and flexible modeling. In addition, by imposing accurate boundary conditions from the wall, the stability and accuracy of the solution are enhanced. The performance of the proposed method is validated through numerical examples, compared with various analytical and experimental results.
1 May 2025 in Physics of Fluids
We compare two widely used Lagrangian approaches for modeling granular materials: the Discrete Element Method (DEM) and Smoothed Particle Hydrodynamics (SPH). DEM models individual particle interactions, while SPH treats granular materials as a continuum using constitutive rheological models. In particular, we employ the Drucker–Prager viscoplastic model for SPH. By examining key parameters unique to each method—such as the coefficient of restitution in DEM and the dilatancy angle in SPH—we assess their influence on two-dimensional soil collapse predictions against experimental results. While DEM requires computationally expensive parameter calibration, SPH benefits from a continuum-scale rheological model, allowing most parameters to be directly determined from laboratory measurements and requiring significantly fewer particles. However, despite its computational efficiency, viscoplastic SPH struggles to capture complex granular flow behaviors observed in DEM, particularly in rotating drum simulations. In contrast, DEM offers greater versatility, accommodating a broader range of flow patterns while maintaining a relatively simple model formulation. These findings provide valuable insights into the strengths and limitations of each method, aiding the selection of appropriate modeling techniques for granular flow simulations.
1 July 2024 in Physics of Fluids
We propose a new smoothed particle hydrodynamics (SPH) model that applies a segment-based wall boundary treatment method (SBWM) for heat transfer applications. We begin by focusing on natural convection simulations, where accurately modeling heat-transferring wall boundaries is crucial as they are the energy source driving the flow. A conventional SPH approach that handles such tasks is the boundary particle (BP) method, which constructs wall boundaries by placing multiple layers of particles on and behind the walls. Despite its capability of imposing accurate boundary conditions, the BP approach becomes a non-trivial task when the fluid domain involves complex boundaries. Moreover, computational costs may significantly increase because of the increased number of SPH particles necessary for modeling walls. Therefore, we utilize the recent development of SBWM to efficiently model energy-transferring wall boundaries. Specifically, SBWM is applied to the energy conservation equation for the wall heat transfer model, using the boundary truncation terms derived in this work. The SBWM-SPH method is verified in various numerical examples, comparing the results with BP-SPH and finite volume method as well as experimental data in the literature. Our study finally extends to investigating a heat exchanger with an optimized shape, demonstrating how SBWM-SPH effectively handles practical issues associated with the BP method while providing accurate heat transfer calculations for the wall.
1 December 2025 in Physics of Fluids
In this study, we propose a graph neural network (GNN)-based numerical model for efficiently predicting the flow behavior of non-Newtonian fluids with free surface dynamics. Conventional numerical approaches, such as the finite element method, often suffer from computational inefficiency and convergence issues when simulating non-Newtonian fluids whose viscosity varies dynamically with the local shear rate. To overcome these limitations, particle-based methods such as smoothed particle hydrodynamics (SPH) have been developed, offering greater robustness for complex free-surface flows. However, SPH remains constrained by hardware-dependent scalability, as even parallelization techniques using graphics processing units (GPUs) are limited by system-specific constraints and computational cost. To address these challenges, we extend the SPH framework by introducing a graph neural network (GNN)-based model, which achieves efficient, data-driven prediction of non-Newtonian fluid dynamics. In this work, we focus on power-law fluids, one of the simplest models of non-Newtonian behavior. Our GNN model is trained on SPH simulation data, learning the effects of particle accelerations in the presence of SPH particle interactions based on the fluid's power-law model parameters. We demonstrate that the GNN significantly accelerates computations while maintaining reliable accuracy in benchmark tests, including dam-break and droplet impact simulations. Quantitative evaluations demonstrate that the GNN reduces computation time by approximately 30% compared to conventional SPH simulations, while maintaining comparable accuracy across benchmark problems such as dam-break and droplet impact cases. The results highlight the potential of GNN-based frameworks for simulating non-Newtonian free-surface flows, paving the way for future data-driven non-Newtonian fluid modeling.
15 August 2024 in IEEE Access
This paper presents a formulation for deterministically calculating optimized paths for a multi-agent system consisting of heterogeneous vehicles. The key idea is the calculation of the shortest time for each agent to reach every grid point from its known initial position. Such arrival time map is efficiently computed using the Fast Marching Method (FMM), a computational algorithm originally designed for solving boundary value problems of the Eikonal equation. By leveraging the FMM, we demonstrate that the minimal time rendezvous point and paths for all member vehicles can be uniquely determined with minimal computational overhead. The scalability and adaptability of the present method during online execution are investigated, followed by a comparison with a baseline method that highlights the effectiveness of the proposed approach. Then, the potential of the present method is showcased through a virtual rendezvous scenario involving the coordination of a ship, an underwater vehicle, an aerial vehicle, and a ground vehicle, all converging at the optimal location within the Tampa Bay area in minimal time. The results show that the developed framework can efficiently construct continuous paths of heterogeneous vehicles by accommodating operational constraints via an FMM algorithm.