A low temperature process (350 °C<T<500 °C) for nanocrystalline diamond film growth by microwave plasma-enhanced chemical vapor deposition has been developed that yields high rates (up to 2.5 μm/h) at relatively low plasma powers (0.5 kW). In contrast to the widely used H2-rich mixtures of CH4 or CO and H2 that exhibit monotonic decreases in the diamond growth rate as T is reduced from 800 to 400 °C, CO-rich mixtures of CO and H2 exhibit an increase and sharp maximum as T is reduced. The results suggest a different diamond growth mechanism from the CO-rich mixtures.
Biplate compensators made from are being used increasingly in rotating-element single-channel and multichannel ellipsometers. For the measurement of accurate ellipsometric spectra, the compensator must be carefully (i) aligned internally to ensure that the fast axes of the two plates are perpendicular and (ii) calibrated to determine the phase retardance δ versus photon energy E. We present alignment and calibration procedures for multichannel ellipsometer configurations with special attention directed to the precision, accuracy, and reproducibility in the determination of Run-to-run variations in external compensator alignment, i.e., alignment with respect to the incident beam, can lead to irreproducibilities in δ of ∼0.2°. Errors in the ellipsometric measurement of a sample can be minimized by calibrating with an external compensator alignment that matches as closely as possible that used in the measurement.