A techno-economic analysis of perovskite-silicon tandem solar modules is presented, outlining the most viable pathway for designing cost-effective, commercially viable tandems.
Although two-terminal perovskite-silicon tandem solar cells have rapidly increased in efficiency, they have only been demonstrated with n-type silicon, which currently constitutes less than 5% of the global photovoltaics market. In this paper, we realize the first two-terminal perovskite tandem with p-type silicon by developing a recombination contact that enables voltage addition without damaging either subcell. We find that silicon interband recombination contacts are limited by a $\text{SiO}_{x}$ charge-extraction barrier, which forms during oxidative top-cell fabrication. A sputtered 30-nm indium tin oxide layer is found to protect the silicon cell surface from oxidation, while forming a recombination contact with the p-type nickel oxide hole transport layer for the perovskite top cell. Using this recombination contact we achieve voltage addition between the perovskite top cell and aluminum back-surface field p-type silicon bottom cell. We also find that minimizing moisture on the nickel oxide surface is important for achieving a stable open-circuit voltage under illumination. The recombination contact developed herein could play an important role in near-future developments.
Increasingly large amounts of electric supply and load are being deliberately operated or sited on the basis of marginal emissions factor (MEF) models. Validating and calibrating such models is therefore of growing policy importance. This paper uses a natural experiment involving variation in relative changes in wind generation potential at wind farms in the ERCOT power grid to create a benchmark MEF and examine the relative accuracy of several common classes of short term MEF models. This work focuses on MEFs at the level of a few individual generating nodes, a much smaller geographic scale than the Balancing Authority (BA) or load zone. Additionally, the use of wind generation potential as a regressor allows us to factor in wind curtailment, in contrast to previous work. We evaluate multiple prevalent existing MEF models and find that both dispatch and statistical MEF models have a high degree of agreement with the benchmark MEF, while heat rate and average emissions do not. We also find that the emissions reduction benefits of optimizing electricity with MEFs using a geographically granular model instead of a BA-wide model are 1.4, 1.3 and 1.5 times larger for dispatch, statistical and heat rate models, respectively.