International audienceThe shear stress relaxation modulus G(t) may be determined from the shear stress (tau) over cap (t) after switching on a tiny step strain gamma or by inverse Fourier transformation of the storage modulus G'(omega) or the loss modulus G `'(omega) obtained in a standard oscillatory shear experiment at angular frequency.. It is widely assumed that G(t) is equivalent in general to the equilibrium stress autocorrelation function C(t) = beta V which may be readily computed in computer simulations (beta being the inverse temperature and V the volume). Focusing on isotropic solids formed by permanent spring networks we show theoretically by means of the fluctuation-dissipation theorem and computationally by molecular dynamics simulation that in general G(t) = G(eq) + C(t) for t > 0 with G(eq) being the static equilibrium shear modulus. A similar relation holds for G'(omega). G(t) and C(t) must thus become different for a solid body and it is impossible to obtain G(eq) directly from C(t)
The apparent analogy between the self-diffusion of linear oligomers in monodisperse systems, 2 up to 32 monomers, and their tracer diffusion in an entangled polymer matrix of length 256 is investigated by molecular dynamics simulations at constant pressure. Oligomers and polymers are represented by the same coarse-grained (bead-spring) model. An analysis based on the Rouse model is presented. The scaling relationship of the self-diffusion coefficient D with the chain length N written as D∝N−α is analyzed for a wide range of temperatures down to the glass transition temperature Tg. Near Tg, the heterogeneous dynamics is explored by the self-part of the van Hove distribution function and various non-Gaussian parameters. For the self-diffusion in a monodisperse system a scaling exponent α(T)>1 depending on temperature is found, whereas for the tracer diffusion in an entangled matrix α=1 is obtained at all temperatures, regardless of the oligomer length. The different scaling behavior between both systems is explained by a different monomer mobility, which depends on chain length for monodisperse systems, but is constant for all tracers in the polymer matrix.
This paper studies the rheology of weakly entangled polymer melts and films in the glassy domain and near the rubbery domain using two different methods: molecular dynamics (MD) and finite element (FE) simulations. In a first step, the uniaxial mechanical behavior of a bulk polymer sample is studied by means of particle-based MD simulations. The results are in good agreement with experimental data, and mechanical properties may be computed from the simulations. This uniaxial mechanical behavior is then implemented in FE simulations using an elasto-viscoelasto-viscoplastic constitutive law in a continuum mechanics (CM) approach. In a second step, the mechanical response of a polymer film during an indentation test is modeled with the MD method and with the FE simulations using the same constitutive law. Good agreement is found between the MD and CM results. This work provides evidence in favor of using MD simulations to investigate the local physics of contact mechanics, since the volume elements studied are representative and thus contain enough information about the microstructure of the polymer model, while surface phenomena (adhesion and surface tension) are naturally included in the MD approach.
1 November 2021 in Biochimica et Biophysica Acta (BBA) - Biomembranes