16 July 2022 in Combustion and Flame
25 May 2022 in Propellants, Explosives, Pyrotechnics
The burning rate of solid propellants is an important factor for optimizing rocket motors and improving performance. The enhanced burning rate can increase thrust and reduce a propulsion system‘s overall size and weight. In this study, a novel nano‐aluminum/THV composite additive was prepared and introduced into a solid ammonium perchlorate/polybutadiene composite solid rocket propellant to enhance its burning rate. The morphology of the composite particle additive and its effects on combustion were characterized. The use of small quantities (<15 wt.%) of the additive resulted in a burning rate enhancement of up to 2.1 times that of the conventional coarse aluminized propellant with a specific impulse loss of only 3 seconds, and as much as 4.7 times enhancement with a predicted loss of 22 seconds in theoretical specific impulse. Some of this loss may be recovered by the improved combustion efficiency in smaller rocket motors because the additive was shown to significantly reduce the aluminum agglomeration at the propellant burning surface and reduce the size of reaction products which may reduce two‐phase flow losses. The additive also provides wide burning rate tailorability, favorable for motor, grain, and thrust curve design. The burning rate enhancement mechanism is thought to be a physical cratering mechanism governed by the burning rate disparity between the binder/oxidizer system and the nano‐aluminum/fluoropolymer additive and not a chemical catalytic effect.
29 May 2023 in Combustion and Flame
31 January 2023 in Propellants, Explosives, Pyrotechnics
Aluminum (Al) and polyvinylidene fluoride (PVDF) composites can be used in many unique applications in the field of energetic materials. Due to their low melting point, many PVDF composites can be additively manufactured. However, more research is needed to better understand the ignition and combustion of these materials. Manipulating the size of aluminum (Al) particles in Al/PVDF composites can drastically alter the burning rate, ignition characteristics, and possibly flame temperatures. This study characterizes the ignition of additively manufactured micro‐ and nano‐ Al/PVDF composites through hotwire ignition tests. Both nAl and μAl particles were mixed in PVDF at 20 wt.% and additively manufactured into disks via fused filament fabrication. The nAl/PVDF printed disks ignited at a minimum ignition power (MIP) of 4.1 W compared to the 9.5 W required for ignition of μAl/PVDF disks. At identical powers, ignition delays were significantly shorter for nAl/PVDF disks. Additionally, while the nAl/PVDF disks reacted instantaneously at any power above their MIP, the μAl/PVDF disks exhibited smaller, localized flames before complete combustion, if the power was below 17.5 W. Flame temperatures were estimated through three‐color pyrometry and compared to thermochemical equilibrium calculations. While theoretical flame temperatures for nAl/PVDF and μAl/PVDF are 2023 K and 2314 K respectively, both samples burned near 2000 K when measured using pyrometry.
20 February 2025 in Combustion and Flame
1 November 2023 in AIP Advances
Optical sources such as lasers provide a means for precise temporal and spatial control of the ignition of energetic materials through customized deposition of excitation energy. Using coupled microscale electromagnetic (EM) and thermal simulations, we analyze the interactions between the EM waves and the microstructures of PVDF/nAl composites with weight fractions of nAl particles (or solids loadings), wf, ranging from 10 to 40 wt. %. Statistically equivalent microstructure sample sets with multiple random microstructure instantiations are generated and used for each solid loading, thereby allowing the statistical variations in the material heating behavior due to microstructure randomness to be analyzed. Maxwell’s equations are solved to characterize the interactions between the materials and EM waves at wavelengths of 266, 532, and 1064 nm. The resulting energy deposition rate is calculated, accounting for Joule heating, dielectric heating, and magnetic induction heating. The coupled thermal analysis accounts for the energy deposition and thermal diffusion, yielding the temperature fields in the materials. The energy deposition and heating are characterized using three measures: the skin depth of the EM wave, the depth of the significant temperature increase in the material, and the average temperature. An empirical relation is developed for the average temperature increase in the heated layer of the material as a function of the intensity of the input laser, solids loading, and time. It is found that trends in the average temperature and depth of significant heating correlate well with the ignition trends observed in experiments.