11 August 2005 in Thin Solid Films
1 January 2007 in Journal of the Electrochemical Society
The requirement for the superplanarization of interconnect nanotechnology beyond <mml:math display="inline"><mml:mrow><mml:mn>100</mml:mn><mml:mspace width="0.3em"></mml:mspace><mml:mi>nm</mml:mi></mml:mrow></mml:math>100nm poses an urgent need to study the complicated behavior of copper CMP. It is common practice in advanced copper chemical mechanical planarization (CMP) polishing to add the inhibitor into the slurry to keep the copper surface perfect and smooth and to protect the copper surface from corrosion. It is beneficial to have the polishing pressure cushion between abrasives and wafer under the different pattern features and is most important to overcome the planarization limitation. This study describes the behavior of non-Preston’s phenomena under the passivated additives (inhibitors) and develops a model to explain the mechanism of the passivated-and-oxidated kinetics with non-Preston’s polishing, which explains the mechanism of copper surface reactions during polishing. Furthermore, our model shows that the three regions are due to different relationships between removal rate and polishing pressure. Three regions are characterized as the threshold, linear, and saturated zones, which are governed by the chemical etching, the depth of abrasive particles indent into the copper oxide, and the oxidation rate, respectively. Most of all, the removal rate change can be simulated and predicted by the ratio between the inhibitor and oxidizer concentrations. Therefore, this study does not only contribute the understanding of the non-Preston’s behavior but also provides the model under the assumption of the sequential stacked films of passivation and oxide films on the copper surface. The potentiodynamic methods are employed to test the assumption used in the mechanism and model.
1 November 2016 in Thin Solid Films
1 January 2010 in Journal of the Electrochemical Society
The composition of the plating electrolyte is important in a copper (Cu) electroplating process. The consumption rate of bis(3-sodiumsulfopropyl disulfide) (SPS) has a strong correlation with the electroplating current density. The decomposition of SPS is relative to the electroplating charge and to the age of the Cu anode. The cathodic current density improves SPS breakdown, and it increases the generation of by-products resulting from SPS decomposition. The aged bath is examined using potentiodynamic polarization and electrochemical impedance spectroscopy. The aged bath helps increase cupric ion reduction because the concentration of cupric ions increases with time after Cu electroplating. The SPS species reacted with cuprous ions to produce the Cu-accelerator complex, which increased the depolarization effect.
1 January 2007 in Electrochemical and Solid-State Letters
In semiconductor metallization processes, the galvanic corrosion of metals should be controlled to improve the process integrity. Refractory metals such as tantalum and tantalum nitride are widely used as a barrier metal to prevent the copper (Cu) metal from diffusing into the dielectric layers. In this study, the galvanic effect between the Cu seed and the film, which is deposited with different nitrogen gas flow rates was investigated using chemical mechanical polishing slurries. It was found that the galvanic corrosion of the films decreased whereas the galvanic corrosion of the Cu seed increased as the gas flow rate increased. The whole Cu corrosion rate was higher than that of the films because the intrinsic corrosion of the Cu seed dominated the overall Cu corrosion rate in the acidic slurry, but for the films the galvanic corrosion dominated. This study also proposed a model to reveal the galvanic effect between the Cu seed and various films.