19 April 2022 in IEEE Transactions on Vehicular Technology
The unmanned aerial vehicle (UAV) channel models are very important and useful for the design and evaluation of UAV communications. In existing works, the terrestrial scatterers are widely stationary or moving all the time, and the UAV is assumed to move at a constant speed. However, these modeling assumptions may not be appropriate in realistic scenarios. In this work, we propose a new 3-dimensional (3-D) dynamic non-wide-sense stationary (non-WSS) cluster-based geometric model for UAV multiple-input multiple-output (MIMO) channels. We assume that a few non-isotropic scatterers are distributed around the terrestrial receiver and have a probabilistic movement behavior. Meanwhile, we consider that the UAV flies at a varying speed, and we design a non-stationary mobility model with acceleration. The proposed channel model performs the birth-death evolutionary process of clusters based on a Markov model, and the time-variant multipath component (MPC) parameters (e.g., angle of arrival/departure (AoA/AoD), power, and delay) are obtained. In addition, we derive the space-time correlation function, mean Doppler spread, and root-mean-square doppler shift spread of the UAV MIMO channels, and provide the quasi-stationary interval. We also investigate the impact of some key model factors on the statistical properties by numerical simulations. Finally, we compare the space-time correlation functions and the second-order statistical properties between the proposed model and the UAV channel measurement results. The close agreements between the numerical simulations and field measurements have validated the proposed model.
7 February 2023 in IEEE Transactions on Vehicular Technology
In air-to-ground unmanned aerial vehicle (UAV) communications, an accurate channel propagation model is very important for the evaluation and design of communication systems. For this purpose, we have conducted several channel measurement campaigns in the airport area at UHF- and L-band (around 433 MHz and 1.518 GHz). In the line-of-sight (LoS) case, we give the distance-dependent pathloss models for both frequenciy bands. Meanwhile, it is found that the measured pathloss in the LoS scenario has a good agreement with the two-ray propagation model at short link distances. This is because of the strong ground reflection path. In the non-LoS (NLoS) case, we propose the elevation-dependent pathloss model at UHF-band based on the field measurement results. On the other hand, considering that the airframe of the UAV can block the wave propagation during the 3-D rotation in the air and the taking off and landing procedures, we specifically analyze the statistical characteristics of the airframe shadowing loss for the two cases and provide the loss distribution models for the fixed-wing, small-sized UAVs made of wood structure and carbon fiber skins.
30 May 2022 in IEEE Transactions on Antennas and Propagation
Antenna-free channel models can reflect real multipath propagation and can be applied widely for performance analysis, simulation, and physical emulation, combined with specific antennas used in the communication systems. However, the millimeter-wave (mmWave) channel measurement is usually performed by steering horn antennas, and the measured channel responses are actually spatial convolution of the channel propagation models and antenna pattern, which is commonly referred to as the antenna embedding effect. In this work, we propose a novel antenna de-embedding algorithm based on the deconvolution with Tikhonov regularization. By suppressing parts of the observed responses which are disguised by noise, the Tikhonov regularization facilitates the deconvolution of antenna pattern and enables the extraction of propagation models. In particular, in order to minimize the impact of deconvolved noise, we design an optimization algorithm to obtain the appropriate regularization factor with low computational complexity. To validate the proposed approach, we have performed an indoor mmWave channel measurement campaign using two different steering horn antennas. The principal peaks in the synthesized channel responses are accurately reconstructed, and the signal-to-noise ratio (SNR) is improved. The experiments verify that the proposed scheme de-embeds effectively the antenna effect and leads to the antenna-free channel models.