22 October 2018 in Nanoscale
The rational design of highly-active and stable reversible oxygen electrocatalysts for both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) plays a key role in rechargeable metal–air batteries, yet remains a great challenge. Herein, a novel dual-crosslinked hydrogel strategy is proposed to synthesize a new type of carbon aerogel that anchors the iron–cobalt (FeCo) particles as a bifunctional oxygen catalyst. The proposed hydrogel composed of an organic/inorganic network can be easily obtained by initiating sol–gel polymerization of cyanometalates, chitosan and graphene oxide. After pyrolysis, FeCo nanocrystals can be in situ uniformly immobilized within the N-doped “dual-network” carbon aerogels (FeCo/N-DNC) with a robust 3D porous framework. When used as an electrocatalyst, the newly developed FeCo/N-DNC aerogels exhibit a positive onset potential (0.89 V) and half-wave potential (0.81 V) for the ORR and a low overpotential (0.39 V) at 10 mA cm−2 for the OER, while presenting excellent electrochemical stability after being tested for 10 000 s. More importantly, the FeCo/N-DNC driven Zn–air battery reveals a smaller charge/discharge voltage gap, higher power/energy density and better cycling stability than the costlier Pt/C + RuO2 mixture catalyst. Our findings provide a facile and feasible synthetic strategy for obtaining highly active and stable electrocatalysts.
22 January 2021 in Nanoscale Horizons
High-entropy alloy (HEA) nanoparticles (NPs) hold great promise in electrocatalysis because of their nearly unlimited compositions, tailorable active sites, and high durability. However, the synthesis of these compositionally complex structures as monodisperse NPs remains a challenge by colloidal routes because the different rates of metal precursor reduction lead to phase separation. Here, we report the conversion of core@shell NPs into HEA NPs through annealing, with conservation of sample monodispersity. This potentially general route for high-quality HEA NPs was demonstrated by preparing PdCu@PtNiCo NPs via seed-mediated co-reduction, wherein Pt, Ni, and Co were co-deposited on PdCu seeds in solution. These multimetallic NPs were then converted to single-crystalline and single-phase PdCuPtNiCo NPs through annealing. On account of their small particle size, highly dispersed Pt/Pd content, and low elemental diffusivity, these HEA NPs were found to be a highly efficient and durable catalyst for the oxygen reduction reaction. They were also highly selective for the four-electron transfer pathway. We expect that this new synthetic strategy will facilitate the synthesis of new HEA NPs for catalysis and other applications.
29 May 2018 in Journal of Materials Chemistry A
The shape control of multi-metal nanocrystals with concave structures is significant for constructing high-efficiency electrocatalysts. Herein, we report an effective one-pot hydrothermal synthetic strategy that allows high-yield production of CuPd@Pd core–shell tetrahedra with concave and Pd-enriched surfaces. It is demonstrated that L-proline plays a vital role as a structure-directing agent in tuning the nucleation and growth of concave CuPd@Pd tetrahedra because of the strong coordination abilities of CO, O–H and N–H groups with metal ions. This bimetallic concave structure can endow the nanocrystals with abundant catalytically active sites and fascinating electronic effects, which are suggested to be favorable for electrocatalysis. When used as an electrocatalyst, the newly developed catalyst presented 4.2 and 2.4 times enhanced mass activity (501.8 A gPd −1) and specific activity (49.3 A m−2) for the formic acid oxidation when compared with those of the commercial Pd black catalyst (120.6 A gPd −1; 20.8 A m−2), respectively. Moreover, the concave CuPd@Pd catalyst exhibits substantially enhanced electrocatalytic stability under harsh electrochemical conditions and superior resistance to COads poisoning; this demonstrates that it is a promising candidate as an anode catalyst in direct formic acid fuel cells.
29 January 2019 in Nanoscale
Optimizing structure and composition with respect to electrocatalytic performance is critical to achieve outstanding Pd-based electrocatalysts. Herein, we have successfully developed a novel electrocatalyst of hollow and porous PdRh nanobowls (PdRh NBs) for the ethanol oxidation reaction (EOR) by using urea as a guiding surfactant. Under alkaline hydrothermal conditions, urea molecules can release bubbles (NH3 and CO2) that in turn guide the formation of PdRh nanobowls. The porous bowl-like structures of PdRh NBs expose abundant surface sites, which allows for increased collision frequency via confining reactants within open spaces. In regards to composition, the reason for introducing Rh is that not only is the redox potential of Rh approximate with that of Pd (beneficial to the formation of high PdRh alloy phase), but also it can effectively facilitate the breakage of C–C bond on the electrode surface (enhancing the total oxidation of ethanol to CO2). Benefiting from the compositional and structural advantages, the newly developed PdRh NBs exhibit significantly improved electrocatalytic activity for the EOR compared with those of the pure Pd NBs, PdRh nanoparticles (PdRh NPs) and commercial Pd black. These attributes might make them good anodic candidates for application in direct ethanol fuel cells.
22 November 2016 in Journal of Materials Chemistry A
A novel PtPd@Pt core/satellite nanoassemblies with a PtPd bimetallic core and a dendritic Pt shell was fabricated via a simple yet efficient L-glutamic acid derived self-assembly method. The obtained PtPd@Pt nanoassemblies exhibit the reinforced catalytic performance in the aspect of activity and stability for the oxygen reduction reaction relative to the commercial Pt black.
14 January 2020 in Nanoscale
Pd-Based nanoparticles are excellent alternatives to the typically used Pt-based materials that catalyze fuel cell reactions. Specifically, Pd-based intermetallic nanomaterials have shown great promise as electrocatalysts for the oxygen reduction reaction (ORR) in alkaline media; however, their synthesis remains a challenge and shape-controlled nanoparticles are limited. Here, a low-temperature approach to intermetallic Pd3Pb nanocubes is demonstrated and their electrocatalytic properties evaluated for the ORR. The intermetallic Pd3Pb nanocubes outperformed all reference catalysts, with a mass activity of 154 mA mgPd −1 which is a 130% increase in activity compared to the commercial Pd/C reference and a 230% increase compared to Pd nanocubes. Tafel analysis reveals that the Pd3Pb nanocubes are highly selective for the 4-electron reduction pathway, with minimal HO2 − formation. Density functional theory (DFT) calculations show that the increased activity for the intermetallic nanocubes compared to Pd is likely due to the weakening of OH* adsorption, decreasing the required overpotential. These results show that intermetallic Pd3Pb nanocubes are highly efficient for the 4-electron pathway of the ORR and could inspire the study of other shape-controlled intermetallics as catalysts for fuel cell applications.