1 October 2022 in Ocean Engineering
22 November 2022 in Ocean Engineering
1 November 2024 in Physics of Fluids
The numerical investigation focuses on the vortex shedding behavior of hydrofoils under the simultaneous occurrence of cavitation and lock-in. To assess the influence of cavitation on vortex-induced vibration in a two-dimensional hydrofoil with a blunt trailing edge, simulations are conducted at 0° and 4° angles of attack. The accuracy of the numerical simulation method is validated through a comparison with experimental cavitation data on the hydrofoil. The results indicate that as the cavitation number decreases, the frequency of the vortex shedding increases, and the vibration amplitude decreases. As cavitation occurs, the vortex shape transitions from circular to elongated ellipsoidal, with an accompanying increase in both strength and volume. At an angle of attack of 0°, the frequency range of the lock-in-state of the hydrofoil is reduced. At an angle of attack of 4°, both sheet cavitation and vortex cavitation manifest during the whole stage of vortex shedding in lock-in and the unstable stage of vortex shedding in non-lock-in.
1 November 2023 in Physics of Fluids
A hydrofoil with a classic cylinder–hydrofoil structure is adopted for study in this paper. The hydrofoil is invented by National Advisory Committee for Aeronautics (NACA) and so-called NACA0012.The hydrofoil is placed in an unsteady turbulent environment by positioning a cylinder in front of the hydrofoil. The simulation includes a solid stress model to calculate the hydrofoil's elastic deformation. Large-eddy simulation is used to simulate the effects of different materials on the hydrodynamic performance and noise characteristics. Researching the hydrodynamic performance and acoustic radiation characteristics of the pitching hydrofoil in a turbulent flow provides a reference basis for its design and manufacture. It was found that different material properties have limited effects on the hydrodynamic performance of pitching hydrofoils, and the generated lift is similar for each case. An analysis of stress changes shows that the stress increases with increasing elastic modulus and as the fixed rod is approached. In contrast, the displacement decreases as the elastic modulus increases. The displacement increases with the distance from the fixed rod. In addition, the noise component results show that thickness noise dominates, and an elastic material hydrofoil has better noise performance.