In this paper, the prospects of iron oxide films and their sulfidation for dye-sensitized solar cells (DSSC) are reviewed. Iron oxide thin films were prepared by hollow cathode plasma jet (HCPJ) sputtering, with an admixture of oxygen in the argon working gas and with an iron nozzle as the sputtering target. The discharge was powered by a constant current source in continuous mode and by a constant voltage source in pulsed mode. Plasma composition was measured by an energy-resolved mass spectrometer. Moreover, secondary electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), absorption and Raman spectra of the films are presented. Strong correlation between the color of the iron oxide film and its phase composition was revealed. Iron oxide films were sulfided at 350 °C. A relatively clean pyrite phase was obtained from the magnetite, while the marcasite with admixture of the pyrite phase was obtained from the hematite. Low influence of sulfidation on the films’ microstructure was demonstrated.
We present a comparative study of electron density obtained in a low-temperature plasma by the cutoff probe and compare the results with data from both the hairpin and the Langmuir probes. The measurements with different probes were conducted in a DC discharge generated by an iron hollow cathode under identical experimental conditions. This comparative analysis provides insight into the reliability and consistency of electron density measurements across different probe types in this specific experimental setup. The information acquired from the cutoff and hairpin probes enables electron density measurements within the frequency range limitations of the instruments. Measurements of electron density are performed in a mixture of argon and oxygen at a low pressure of 5 Pa, in dependence on the discharge current and Ar:O2 mixture ratio. A qualitative discussion of the obtained results is provided.
27 February 2026 in Plasma Physics and Controlled Fusion
We present a hot tungsten cathode system (HTCS) to study the interactions between low-temperature plasma and thin metal layers sputtered onto both conductive and non-conductive substrates. This research aims to understand material selection for liquid metal divertor (LMD) applications. Before interaction in the hot cathode system, we prepared three series of samples using high power impulse magnetron sputtering. Plasma parameters were measured using Langmuir probes in a DC discharge generated under identical experimental conditions. The morphology of samples after interaction in a hot tungsten cathode was studied using scanning electron microscopy.
Understanding the behaviour of multicomponent plasmas under magnetically confined low-pressure conditions is essential for advancing plasma-assisted chemical conversion and materials processing. Here, we report a comprehensive diagnostic of a ternary He:N 2 :CO 2 plasma sustained in a DC driven non-segmented cylindrical magnetron. Using complementary optical emission spectroscopy and Langmuir probe measurements, we resolve the electron temperature, electron density, rotational and vibrational temperatures across a range of discharge conditions. The gas mixture (in ratio of 3:2:1) enables controlled probing of energy transfer pathways in a plasma active environment. By systematically varying magnetic field strength, discharge current, and operating pressure while maintaining constant gas flow, we reveal distinct non-linear responses of electron kinetics and molecular excitation to magnetron confinement. This work uniquely focuses on establishing a ‘thermal decoupling’ regime where strong magnetic confinement (40 mT) enables the plasma to maintain high electron densities for reactivity while keeping the neutral gas background at near ambient temperatures, effectively preventing the efficiency losses typically caused by gas phase heating. The results elucidate the interplay between magnetic confinement, electron energy distribution, and vibrational excitation in ternary plasmas, providing quantitative insight into plasma mechanisms relevant to low pressure magnetron systems.