8 August 2018 in ACS Applied Materials & Interfaces
19 April 2022 in Physical Chemistry Chemical Physics
Organic–inorganic lead halide perovskite solar cells (PSCs) attract great research interest due to their significant device performance and optoelectronic properties. However, reducing charge recombination and efficiency loss due to surface defects of the perovskite layer are still big issues to overcome for PSCs. Herein, we have employed a simple molecule, 2-thiophenecarboxylic acid (2TiCOOH), via post-treatment to passivate the uncoordinated Pb2+ on the perovskite film surface and improve the stability at the perovskite/Spiro-OMeTAD interface. The spectral results illustrate that the 2TiCOOH passivated devices exhibit higher carrier lifetime, charge extraction, and minimized defect induced recombination. Also, solar cells with 2TiCOOH show better charge collection, improved JSC, FF, and outstanding power conversion efficiency (PCE). In addition, 2TiCOOH passivated solar cells show tremendously stable performance output with less than 1% PCE drop after 100 days. This work provides a facile surface passivation strategy for fabricating highly efficient, low cost, and stable perovskite solar cells, which can be used for large scale technology and commercialization.
22 April 2022 in Physical Chemistry Chemical Physics
BCBenjamin P. Cherniawski
+3
Single crystal studies provide a better understanding of the basic properties of organic photovoltaic devices. Therefore, in this work, rubrene single crystals with a thickness of 250 nm to 1000 nm were used to produce an inverted bilayer organic solar cell. Subsequently, polycrystalline rubrene (orthorhombic, triclinic) and amorphous bilayer solar cells of the same thickness as single crystals were studied to make comparisons across platforms. To investigate how single crystal, polycrystalline (triclinic-orthorhombic) and amorphous forms alter the charge carrier recombination mechanism at the rubrene/PCBM interface, light intensity measurements were carried out. The light intensity dependency of the JSC, VOC and FF parameters in organic solar cells with different forms of rubrene was determined. Monomolecular (Shockley Read Hall) recombination is observed in devices employing amorphous and polycrystalline rubrene in addition to bimolecular recombination, whereas the single crystal device is weakly affected by trap assisted SRH recombination due to reduced trap states at the donor acceptor interface. To date, the proposed work is the only systematic study examining transport and interface recombination mechanisms in organic solar cells produced by different structure forms of rubrene.
23 July 2025 in ACS Omega
In this study, we explore the effect of halogen-light-assisted (LA) annealing on the crystallization of poly(3-hexylthiophene) (P3HT) films and the morphology of P3HT:[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) blends, along with their impact on organic solar cell performance. Samples were annealed at various temperatures (100–120 °C) and durations (5–15 min) using both conventional hot plate (HP) and LA methods. Structural analysis showed that LA annealing significantly enhanced the crystallinity of P3HT films through improved in-plane molecular stacking. For the P3HT:PCBM blend layers, the best film quality and device performance were achieved with LA annealing at 100 °C for 15 min, resulting in a power conversion efficiency (PCE) of 3.10% compared to 2.22% for the HP-annealed counterpart. We further evaluated blends with different P3HT:PCBM ratios (1:0.6, 1:1, and 1:1.4) and found that P3HT-rich compositions, especially 1:0.6, benefited most from LA annealing, achieving better film morphology and higher efficiency. Charge transport and recombination behavior were studied through time-resolved photoluminescence, light-intensity-dependent J–V, and space charge limited current measurements. These analyses confirmed that LA annealing improves charge carrier mobility, reduces trap densities, and minimizes nonradiative recombination. Overall, our results demonstrate that LA annealing is an effective and scalable method to enhance both the material quality and photovoltaic performance in P3HT:PCBM-based solar cells.
19 July 2024 in ACS Applied Engineering Materials
31 December 2021 in Mugla Journal of Science and Technology
In this study, the effect of magnetic field, which is perpendicular to junction current, on diffusion current has been investigated in Germanium based p-n homojunction diodes, theoretically. The magnetic field dependent diffusion current has been derived analytically. Resulting magnetic field dependent diode equation has been used to produce current – voltage theoretical data. Using this data, current – voltage curves of devices, I(B) - V have been plotted under different magnetic fields and effect of magnetic field on current – voltage characteristics has been investigated. According to these results, it has been observed that increasing magnetic field increases potential barrier Vth, decreases junction current and reverse saturation current I0. Also effect of magnetic field on static and dynamic magnetoresistances, using Rd(B) – V and Rs(B) – V graphs which is plotted using theoretical data, have been analyzed and it has been observed that increasing magnetic field increases static and dynamic magnetoresistance in Germanium based devices.