Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, China
Auto-generated profile, based on publicly available information
Xiaoyan Li
Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, China
Tetraphenylphosphonium bromide (TPPB) ionic liquid-supported catalysts were synthesized and evaluated for the acetylene hydrochlorination reaction for the development of highly efficient nonmetal catalysts as substitutes for the currently used industrial mercuric catalyst in the production of vinyl chloride (VCM). The optimal 15% TPPB/SAC catalyst exhibited favorable catalytic activity and stability, with the highest acetylene conversion of 97.1% and the selectivity for VCM above 99.5% under the conditions of 220 °C, an acetylene gas hourly space velocity (GHSV) = 30 h−1 and VHCl/V C2H2 = 1.15. Characterized by TPD, FTIR, XPS, etc., TPPB exhibits strong adsorption toward HCl but very weak adsorption toward C2H2 and VCM; in particular, the adsorbed HCl can change the conformational structure of TPPB. DFT calculations suggest that over the active catalytic site of TPPB, the activation energy of acetylene hydrochlorination is 21.15 kcal mol−1, which is much lower than that without catalyst (44.29 kcal mol−1). During the reaction, the H–Cl bond is preferentially activated through accepting the electrons transferred from the anion of TPPB, and then the C2H2 is activated to complete the addition reaction of H and Cl. Such unique preferential activation toward the H–Cl bond as well as the weak adsorption to the product VCM promotes the catalytic activity and the stability of the supported TPPB catalysts. The amount of carbon deposition on the 15% TPPB/SAC catalyst is as low as 2.99%, even after 300 h of reaction. The high activity and stability of the 15% TPPB/SAC catalyst indicate great promise for its application as a nonmetal catalyst for acetylene hydrochlorination.
29 March 2023 in Colloids and Surfaces A: Physicochemical and Engineering Aspects
Theoretical prediction of catalytic performance is crucial for the rational design of novel catalysts. In this study, density functional theory (DFT) simulations were carried out to predict the catalytic performance of four ionic liquids (ILs) used as novel non-metal catalysts in the acetylene hydrochlorination reaction, and the obtained catalytic performances were verified via our experimental tests; moreover, both the theoretical and experimental results showed that the catalytic performance of the four IL catalysts followed the order tetraphenylphosphonium bromide (TPPB) > tetraphenylphosphonium chloride (TPPC) > butyltriphenylphosphonium bromide (BuTPPB) ≫ tetraphenylphosphonium tetrafluoroborate (TPPT), and the 15%TPPB/SAC catalyst exhibited efficient catalytic performance when compared with the recently reported non-metal catalysts for the acetylene hydrochlorination reaction. Furthermore, the catalytic mechanisms of the four ILs with different cations and anions were revealed via theoretical Mulliken, partial density of states (PDOS) and electron density difference (EDD) analyses combined with the experimental XPS and XRD characterizations. The results showed that the effects of the anions on the catalytic activity were much significant than those of the cations. A good IL non-metal catalyst for acetylene hydrochlorination would mainly donate electrons to Cl to activate the H–Cl bond, and then, the electrons would be donated back to the IL catalyst in the transition state. This study provides new insights into the design of efficient nonmercuric catalysts for the acetylene hydrochlorination reaction.