25 July 2023 in Engineering Applications of Artificial Intelligence
22 October 2024 in IEEE Sensors Journal
Various sensors are used for structural health monitoring. An acoustic emission sensor detects an elastic wave propagating in the medium, so it can detect the possibility of defects occurring inside the structure. Using multiple sensors enables the estimation of the signal source through the differences in signals measured by each sensor. Among the information for signal analysis, the time difference of arrival is the most commonly used factor for estimating the location of the source. However, it is difficult to accurately determine the arrival time because the measured signal always contains ambient noise. Even though the arrival times of signals are determined, there is the following task to identify the source location, which is also complicated because the signal does not propagate with a constant velocity throughout the medium. To solve this problem, this study adopts a hybrid approach that applies artificial intelligence techniques step by step. In the first phase, the time-series data are classified as signal and non-signal by the long short-term memory network. The second phase is to identify the source location based on the naive Bayes classifier using the distribution of the arrival times of signals extracted from multiple sensors. Since this approach reduces complex computations in signal processing while minimizing the masking of physical meaning by black-box AI technology, it allows for versatile applications depending on the objectives. The proposed method was validated through an experimental test, and the results showed that the method had reliable performance.
30 April 2025 in IEEE Sensors Journal
Conventional structural maintenance approaches, such as visual inspections and vibration-based system identification, have limitations in consistency, reliability, and sensitivity to environmental factors. Simulation-based damage detection and dynamic response-based finite element (FE) model updating also have inherent constraints in practical applications. To address these challenges, this study proposes a novel methodology for identifying structural stiffness in bridge structures by integrating computer vision and deep learning techniques. The proposed method consists of two phases: (1) extracting displacement influence lines under a moving load using computer vision and (2) identifying stiffness distribution using deep learning. In the first phase, the computer vision technique accurately tracks vehicle positions and structural displacements, ensuring precise measurement of displacement influence lines. In the second phase, a deep neural network updates the stiffness distribution of the FE model to reflect the as-is condition. The network is trained using simulation data with various stiffness distributions. A lab-scale test was conducted to validate the proposed method, demonstrating that the updated FE model closely matches the actual structure in terms of dynamic characteristics. The proposed method leverages influence lines to highlight the load-displacement relationship, which is directly linked to structural stiffness. By employing a well-trained deep neural network capable of handling various stiffness conditions, this approach enables the accurate estimation of key structural properties, facilitating effective data-driven structural health monitoring.