1 August 2003 in Journal of Molecular Catalysis A: Chemical
12 January 2002 in Journal of Macromolecular Science, Part A
N,N′-bis(salicylidene)hydrazine cobalt (II) Schiff base complex immobilized on crosslinked polymer support has been prepared by suspension copolymerization of synthesized N,N′-bis(3-allylsalicylidene)hydrazine monomer along with styrene and divinyl benzene using azobisisobutyronitrile (AIBN) as initiator in the presence of poly(vinyl alcohol) and reacting prepared beads with cobalt (II) chloride solution in dimethyl formamide (DMF). The amount of divinyl benzene in suspension copolymerization has controlled the arrangement and the amount of the N,N′-bis(3-allylsalicylidene)hydrazine monomer in the crosslinked polymer beads. The network structure of the polymer beads has significantly controlled the efficiency of complexation of the N,N′-bis(salicylidene)hydrazine Schiff base with cobalt (II) ions. The swelling behavior has also been affected by the amount of crosslinking agent (DVB) used during copolymerization of functionalized monomer. The crosslinked polymer beads prepared with 1.75 mmol of divinyl benzene have shown highest efficiency of complexation (28.50%) and loading capacity (14.58%) for cobalt (II) ions from the solution of cobalt (II) chloride. The density and size of the beads have also varied on varying the concentration of the divinyl benzene in the reaction mixture. The structural information of the polymer supported cobalt (II) Schiff base complex obtained from IR, UV, and magnetic moment (μ) was compared with unsupported cobalt (II) Schiff base complex. The thermal studies have been carried out to determine the application of polymer supported cobalt (II) complex in catalyzing the reactions operating at high temperature. The kinetic investigations on decomposition of hydrogen peroxide recorded with unsupported and supported cobalt (II) Schiff base complex have been used to evaluate the catalytic activity of cobalt (II) complex anchored on polymer support and to estimate the order of reaction with respect to the concentration of hydrogen peroxide and cobalt (II) Schiff base complex. The energy of activation for decomposition of hydrogen peroxide with polymer anchored cobalt (II) complex has been found to be low (45.95 kJ mol−1) in comparison to the unsupported cobalt (II) complex (66.38 kJ mol−1). Reaction steps for the decomposition of hydrogen peroxide have been proposed and a suitable rate expression has been derived.
28 August 2003 in Journal of Applied Polymer Science
29 September 2020 in Arabian Journal of Chemistry
MMMohd Kamarulzaki Mustafa
KSKhairunnadim Ahmad Sekak
+1
This work presents a study of microwave absorption properties of PAni/Fe3O4/PVA nanofiber composites with different ratio of Fe3O4 nanoparticles. The morphology of the composites nanofibers study by Field Emission Scanning Electron Microscopes (FESEM) and Transmission Electron Microscope (TEM) showed that the low content of Fe3O4 nanoparticles presence in the composites nanofibers indicates very much uniform surface, in the composites nanofiber without many bends, but some bends develop at higher content of Fe3O4 nanoparticles as indicated in the TEM image. Image-J software was used to further investigate the diameter of the composites nanofiber and found to be in the range of 152 to 195 nm. The nanofiber composites show excellent electric and magnetic properties and therefore vary with the addition of Fe3O4 nanoparticles in the composites nanofiber. In addition the PAni/Fe3O4/PVA composites nanofibers were further characterized by X-ray diffraction spectra (XRD) and Four Transformation infrared spectra (FTIR). The XRD pattern shows the presence of PAni nanotubes containing Fe3O4 nanoparticles by indicating peaks at 23.4⁰ and 35.43⁰ which was further supported by FTIR analysis. Microwave vector network analyzers (MVNA) were used to estimate the microwave absorption properties of the composites nanofibers. The absorption parameters was found to be -6.4 dB at 12.9 GHz within the range of X-band microwave absorption frequency, this reflection loss is attributed to the multiple absorption mechanisms as a result of the improved of impedance matching between dielectric and magnetic loss of the absorbent materials demonstrating that these materials can be used as protective material for electromagnetic radiation.
14 November 2007 in Journal of Macromolecular Science, Part A
The polymer supported metal complexes of N,N′‐bis(acetyl acetone)o‐phenylene‐diamine (ACPDA) Schiff base were synthesized by suspension copolymerization of styrene and allyl chloride in the presence of divinyl benzene (DVB) as cross‐linker and azobisisobutyronitrile (AIBN) as initiator at 70±0.1°C and then ACPDA Schiff base and metal ions were loaded on the resulting polymer beads. The cross‐linked density in polymer beads was varied by taking different concentrations of divinyl benzene in the reaction mixture. The polymer beads were characterized for their cross‐linked density, size (φ), density (ρ), degree of swelling (%S w ) and loading of ACPDA Schiff base and metal ions. The polymer beads prepared with 1.5 mmol of DVB (Type III) had a sufficient amount of allyl chloride (4.90 mmol, 0.367 g) and showed optimum loading for ACPDA Schiff base (1.96 mmol g−1) and metal ions. The structures of copper(II) and iron(III) ions complexes (ACPDA‐M) and their loading on polymer beads (P‐ACPDA‐M) was characterized with spectral analysis. The catalytic activity of unsupported and polymer supported ACPDA Schiff base complexes of copper(II) and iron(III) ions was evaluated by studying the rate of decomposition of hydrogen peroxide. The rate of decomposition (Rp) of hydrogen peroxide varied linearly with a concentration of hydrogen peroxide and catalyst, but varied inversely with hydrogen ions concentration. Finally reaction steps for decomposition of H2O2 were proposed and a rate expression was derived considering the experimental data.
5 January 2003 in Journal of Macromolecular Science, Part A
N,N′-bis(acetylacetone)o-phenylenediamine cobalt (II) Schiff base complex and its polymer bound analogue have been prepared and characterized for their structure and catalytic activity. To prepare heterogenized analogue of the cobalt (II) complex, a new crosslinked functional polymeric beads were prepared by suspension copolymerization of styrene (48.97 mmol, 5.1 g), allylchloride (48.97 mmol, 3.746 g) and divinylbenzene (1.50 mmol, 0.195 g) in the presence of azobisisobutyronitrile (9.0×10−4 mmol, 0.15 g) as initiator at 25±0.1°C under inert atmosphere. The beads of variable crosslinked densities were prepared by varying the amount of divinylbenzene in a reaction mixture from 0.80–2.00 mmol. The beads prepared with 1.5 mmol of divinylbenzene contained 4.90 mmol (0.367 g) of allylchloride as found with the chlorine content in the beads. These beads have shown optimum degree of swelling (4.83%) and maximum attachment of N,N′-bis(acetylacetone)o-phenylenediamine Schiff base (1.96 mmol g−1 of beads). These b...