We presented here the theoretical analysis of high frequency magnetoelectric (ME) effects for a ferrite-piezoelectric bilayer and a detailed treatment for electric field induced resonance field shift for ferromagnetic resonance (FMR) in layered structures. ME effects in a single-crystal ferrite-piezoelectric bilayer in the magnetoelastic resonance region are considered. The theory predicts a giant ME effect at magnetoacoustic resonance. The enhancement in ME effect predicted by our theory arises from interaction between elastic modes and the uniform precession mode, resulting in magnetoelastic modes. The peak ME voltage coefficient appears at the coincidence of acoustic resonance and FMR frequencies. In our calculations, we suppose that the layer thickness is sufficiently large to neglect the influence of strain relaxation on average stresses in the structures that determine the ME voltage coefficient. The work presented here will certainly be of interest for the design and analysis of electrically controlled high-frequency devices. Microwave devices of magnetic type with electrical control have unique advantages over traditional ferrite and semiconductor analogs.
An analytical expression is derived to approximate the magnetometric demagnetizing factors for two parallel ferromagnetic plates having the shape of rectangular prisms. The magnetometric demagnetizing factors relate the average magnetic fields within the plates’ volumes to an external magnetic field. Knowing this relationship is essential for describing the response of magnetoelectric sensors comprising two parallel magnetostrictive plates. It is shown that two separate ferromagnetic layers provide better field sensitivity than a single layer with a doubled thickness. The obtained results are in a good agreement with numerical calculations and experimental data.
A novel design of a miniature search coil magnetometer is proposed based on the integration of the electronics and batteries within the hollow core of the search coil. In contrast with conventional designs, where the search coil and its electronics have individual housings and electrostatic shields, this paper presents a design in which the core of the search coil serves both as the housing and the magnetic shield for the electronics and batteries. Moreover, the electrostatic shield of the search coil also shields the electronics and batteries. We found that a thin-wall tube core with sufficient permeability is able to replace a solid rod core without decreasing the average flux sensed by the coil winding. In addition, the outer diameter of the tube core can be increased beyond its optimum size to provide more space for the electronics and batteries without considerably affecting the search coil resolution. To validate the effectiveness of this new design, a miniature search coil magnetometer was built and tested for very low frequencies and ultra-low power consumption.