The work solves the problem of obtaining adsorbents from cheap and available feedstock able for the removal of low-molecular-weight toxic organic substances from aqueous solutions. It is proposed to obtain an adsorbent from the wastes of such biodegradable polymer as polylactic acid (PLA), for example, from used packaging. The polymer was heated up to the melting point, cooled and ground. The thermally treated PLA sample contained end carboxyl and hydroxyl groups, which were identified with Fourier-IR spectroscopy, and the ion-exchange activity of the polymer was found. These groups provide a surface charge density of 0.02−0.12 C m-2 in the pH range of 4−10, ξ-potential reaches 30 mV in an alkaline media. Adsorption of such cationic dye as methylene blue (MB) was studied under static and dynamic conditions. The Temkin and Freundlich models were applied to the adsorption isotherms, an increase in the adsorption capacity of the polymer was found with an increase in pH from 4 to 10, while the surface became more energetically heterogeneous. The capacity of PLA is 16−30 mg g-1 in the absence of a supporting electrolyte, and 10−28 mg g-1, when adsorption occurs from a two-component solution containing also NaCl. According to the results of the study of MB adsorption, and the data of electronic spectroscopy for suspension of the polymer, it was established that the dye removal from the solution occurs mainly due to electrostatic attraction to the negatively charged PLA surface. The adsorbent was proposed to be employed for the removal of the residual colour of wastewater after its treatment, for example, with reverse osmosis or nanofiltration.
10 August 2024 in Brazilian Journal of Environmental Sciences
The increased production and consumption of pharmaceuticals represent a potential environmental threat. Thus, advanced treatments are necessary to remove pharmaceutical products from water. A promising removal alternative is low-cost adsorbents, due to their availability, low processing, and favorable results. This study used sunflower seed husks (SSH) and chemically treated sunflower seed husks (TSSH) as bioadsorbents to remove chloroquine from water. Results showed that the pseudo-second-order is the kinetic model with the best fit for both adsorbents. As for isothermic models, the best fit for SSH was Langmuir, and for TSSH, Freundlich. Maximum adsorption capacities of qe=168.09±22.98 mg/g and qe=185.91±27.23 mg/g were found through the isothermic models for SSH and TSSH, respectively. In addition, SSH reached 80% of its initial adsorption capacity after three adsorption-desorption cycles, indicating physisorption and good applicability due to its reusability. Thus, SSH is an efficient adsorbent for chloroquine removal with excellent regeneration capacity, low production cost, and low waste production. This study serves as a model for the use of SSH in the removal of contaminants of emerging concern.
The growing presence of pharmaceutical contaminants in aquatic environments has raised global concerns, highlighting the need for sustainable and cost-effective remediation strategies. This study investigates the use of Sapucaia shell powder (SPC) as a bioadsorbent for chloroquine (CQN) removal from aqueous solutions. Physicochemical characterization revealed a surface enriched with carboxylic and phenolic groups, a predominantly amorphous structure, and a negative surface charge over a wide pH range, favoring interactions with CQN molecules. Adsorption kinetics followed a pseudo-second-order model, indicating chemisorption as the predominant mechanism, while the Weber–Morris model suggested a three-stage process involving surface adsorption, intraparticle diffusion, and equilibrium. Isotherm analysis showed excellent fits to both Langmuir and Freundlich models (R² > 0.96), with a maximum adsorption capacity of 250.09 mg g⁻¹ at 298 K, characterizing an endothermic process enhanced at higher temperatures. Reusability tests demonstrated material stability, retaining approximately 65% of its initial capacity after four adsorption–desorption cycles using only water. The results confirm that SPC is an efficient, low-cost, and environmentally friendly adsorbent for pharmaceutical removal, with potential for practical applications and scalability in wastewater treatment.