1 November 2019 in Proceedings of the IEEE
15 June 2021 in IEEE Transactions on Antennas and Propagation
A novel fan-out wafer-level packaging (FOWLP) technology with double-sided redistribution layers (RDLs) and tall copper vertical interconnects is described. The design of a dual-polarized magnetoelectric (ME) dipole antenna based on this new packaging technology is presented. It is shown that the antenna with a size of $10\times10$ mm 2 achieves good impedance matching and a stable radiation pattern over a wide bandwidth from 25 to 43 GHz, which can cover most of the millimeter-wave (mmWave) bands of the fifth-generation (5G) mobile networks in different countries. The measurement results demonstrate that the antenna is well suited for FOWLP technology and can be used for phased-array modules in 5G wireless communication systems.
10 March 2022 in IEEE Antennas and Wireless Propagation Letters
A simple decoupling structure for a stacked microstrip patch antenna array is proposed. By loading a shorting C-shaped structure and a square ring, the mutual coupling between stacked microstrip patch antenna elements can be adjusted at the low- and high-resonant frequencies, respectively. To verify the feasibility of the proposed decoupling structure, the two-element stacked microstrip patch antenna arrays with and without decoupling structure are implemented and analyzed, respectively. Measured results indicate that the isolation between stacked microstrip patch antenna elements with the decoupling structure is enhanced by 10 dB as compared to the original structure with the free-space half-wavelength spacing at the center frequency.
11 May 2020 in IEEE Antennas and Wireless Propagation Letters
A new approach for the design of wideband multilayer stacked patch antennas is proposed based on bat algorithm (BA). Differential topology is described for normal multilayer stacked patch antennas to achieve stable and symmetry radiation patterns as well as high cross-polarization suppression within the design band. Fabricated antenna prototypes show 25.5% and 34.9% impedance bandwidth for the two-layer and three-layer design, respectively. Measured results validated the design.
31 March 2021 in IEEE Antennas and Propagation Magazine
In recent years, there has been great interest in millimeter-wave (mmwave) and terahertz (THz) technologies due to an increasing demand for ultrahigh data transfer rate. Two novel solutions, i.e., antenna on chip (AoC) and antenna in package (AiP), have been proposed for the development of highly integrated radio and radar systems [1]-[5]. To measure the antenna characteristics of AoC and AiP, a reliable probe-based mm-wave/THz antenna measurement setup became essential. Over the last 20 years, the world has witnessed the prosperous development of various mmwave/THz antenna measurement setups, most of which can be divided into two types, i.e., probe-station and quasi-in-air based. The former type has a feature that allows the testing equipment to be compactly established on a large metal stage, which has been widely used for near-field based and as part of the farfield-based setups [6]-[10]. The antenna under test (AUT) is maintained on a wafer chuck placed on the stage and thus, only the radiation pattern in the upper half-space is measurable due to the metal stage obstruction. The latter type reduces the defect by using an extended supporting structure to hold the AUT in midair away from the stage so that the radiation patterns in both the upper and lower half-spaces are measurable. Many setups of this type measure antennas at far-field distances, and some of them are also compatible with near-field testing. Compared to probe-station based, quasi-inair based takes up much more space and is less compact.