This paper investigates the potential benefits of Ternary blended High-performance concrete containing Silica fume (SF) and Alccofine (AL) as partial cement replacements. The experimental program contains a total of 14 mixes with a water to binder ratio of 0.4 and varying percentages (0-20%) of Silica fume and Alccofine both as binary and ternary blended. Fresh and hardened properties of concrete were evaluated based on slump, compressive strength, flexural strength, split tensile strength and water absorption tests. Ternary mixes containing SF and AL increased concrete compressive strength by 14-27% and tensile strength by 26-43% compared to the reference mix. Rise in early strength development for all the ternary blended mixes is attributed to the presence of highly reactive alccofine. Higher replacement of Alccofine more than 10% led to a steady decrease in strength due to dilution effect, whereas for silica fume, the strength dilution was gradual beyond 15% replacement. Denser particle packing reduced water absorption in ternary mixes. A mix containing 15% SF and 5% AL showed 65.7% reduction in water absorption compared to reference mix. Synergy assessment were done for all the ternary mixes, peak result was obtained for a mixture containing 10% SF and 10% AL. Based on the experimental data, empirical models were developed and compared with the existing codes and earlier researches. Empirical models proposed in this study have the least Integral Absolute Error (IAE) of 0.47% and 1.55% in predicting flexural strength and split tensile strength based on compressive strength of concrete.
1 June 2023 in Results in Control and Optimization
The present study aims to determine the effects of blending cementitious materials on the mechanical and durability properties of high-performance concrete (HPC). Densified silica fume and fine-grounded metakaolin are used as supplementary cementitious materials (SCMs). A total of 16 mixes containing both binary and ternary blending of SCMs were chosen for w/b ratios of 0.4 and 0.3 respectively. The hardened properties tested for the HPC mixes were compressive strength at 7, 28, and 90 days, flexural strength at 28 days, and modulus of elasticity at 28 days. Maximum strength gains up to 15%, 38%, and 23% for compression, flexure, and elastic modulus were observed in ternary mixes compared to binary mixes. Stress-strain behaviour of ternary mixes indicates increased tolerance of stress for the least amount of strain in the specimens. Based on the experimental results, empirical relations were developed and checked with the existing codes and by earlier researchers. The durability properties tested for HPC were water absorption at 28 days, acid attack, and sulphate attack at 28, 56, and 90 days. Ternary mixes improved the pore structure of HPC, resulting in a 56% reduction in water absorption and a 34% reduction in compressive strength loss due to immersion in 5% H2SO4 at 90 days. The findings of the study endorse that ternary blending of SF and MK can improve the engineering properties of HPC, and a mix containing SF 10% and MK 10% is recommended for the best results.