Potsherds recovered from the Saqqara–Memphis floodplain in Egypt, dated according to their typology and radiocarbon dating of the included sediments, are analysed geochemically and mineralogically to identify source materials and fabrication characteristics. Pottery layers were identified and potsherds were recovered from several settlement levels. Sherd typology was used to identify sherds from four periods (the Old and New Kingdoms, and from the Late Period to the Ptolemaic). The Pharaonic pieces were found at depths of between 8 and 12 m and the later material was between 6 and 3 m. Chemical analyses of the potsherds revealed three main source materials: local Nile silt, marl clay and mixed Nile silt–marl. Two marl clay types were recognized: marl clay from Upper Cretaceous marine sediment and another one from Late Pliocene deltaic sediments. The mineralogical composition of the pottery samples shows that the estimated firing temperature was about 850–900°C. No consistent differences in sherd mineralogy and geochemistry were found according to pottery types, so that the ancient Egyptian potters used essentially the same materials throughout the Pharaonic period. However, this initial study has revealed the existence of extensive pottery‐rich occupation sites buried within the Nile floodplain deposits between Memphis and Saqqara.
The aim of this work is not only the synthesis of black ceramic pigment with spinel structure using local and inexpensive minerals (chromite and manganese ores) but also throw some light on the relations between the structure and the colour of obtained pigment. Ultimate utilization spinel solid solution in ceramic materials is mostly due to their structure characteristics, their thermal and chemical stability. In this study colour pigments were ned by calcinations at 1250 ºC starting from a mixture of chromite and manganese oxide. Different compositions were tested containing 30, 40 and 50 wt.% of manganese oxide (low and high content respectively). The phase composition and microstructure characterization of both raw material and obtained pigments were evaluated by X-ray diffraction, X-ray fluorescence, polarizing microscope and scanning electron microscope. Furthermore, the colour measurements of the obtained pigments and tiles were evaluated. Composition of all pigments reveal the spinel structure with Cr2FeO4; hematite was also recorded in the mixture of low manganese. The degree of lightness is relatively same in the pigments mixtures of both manganese types. However, tiles could be considered lightness compared with its pigments, especially of the high manganese type. The solid state calcinations reactions are indeed able to form intense brown pigments that can be used as a stain for industrial ceramic applications. The production of less expensive black ceramic pigments from low cost and less pure raw materials that can be utilized in Egypt to substitute for the imported pure oxides or salts is proved superior performance for producing painted pigments.