1 September 2016 in Archives of Metallurgy and Materials
This paper presents methods of modifying the anode surface layers of Al2O3 by introducing carbon to their microstructure. Composite coatings were prepared using two different methods. In the first, coatings were formed by means of oxidation under constant current conditions. Anodic oxidation of aluminium was conducted in a multicomponent electrolyte with the addition of organic acids and graphite. The second method was based on the formation of oxide coatings in an electrolyte without the addition of graphite or heat treatment of the layers of succinic acid. The obtained coatings were tested using SEM, TEM, and GDOES (glow discharge optical emission spectrometry) and their tribological and stereometric properties were measured. The study demonstrated the beneficial effects of the methods when used to improve the tribological properties of sliding couples.
1 October 2012 in Chemical and Process Engineering: New Frontiers
The paper presents the properties of surface oxide layers with an increased content of carbon for tribological applications. The composite surface oxide layers were produced using a two-step technology through hard anodising of the surface of an aluminium alloy, followed by thermochemical treatment of anodic oxide coatings. The surface oxide layers were subjected to tribological tests in an oil-less sliding couple with T5W plastic. The presented test results confirm the usefulness of the proposed modifications of surface oxide layers for the purpose of enhancing the operational durability of oil-less sliding couples in a reciprocating motion.