1 November 2018 in Electrochimica Acta
30 April 2019 in Journal of the Electrochemical Society
The ginkgo leaf-derived graphitic-N-doped porous carbon was fabricated by one-step carbonization in the presence of KOH agent. The morphology, surface functional groups, element state and porous structure of the obtained carbon were investigated systematically. Compared with the carbon samples by ginkgo-leaf carbonization and KOH post-activation (two-step), the one-step activated porous carbon exhibits high graphitic-N content and good electric conductivity. The conductive-agent-free carbon sheet was made successfully and the resultant carbon electrode possesses good conductivity and excellent electrochemical properties, with the specific capacitance of 176.1 F g−1. When being applied for capacitive deionization, the desalination amount of the electrode arrived at 16.5 mg g−1. Meanwhile, the salt adsorption rate is very rapid, with the average salt adsorption rate reaching 1.5 mg g−1 min−1. This work provides an easy and environmentally benign route for the synthesis of the conductive carbon from natural raw materials for highly efficient capacitive deionization.
1 January 2016 in Electrochimica Acta
2 January 2025 in Journal of Materials Chemistry A
Unique Z-scheme CPB QDs/Cu-BTC core–shell photocatalysts were constructed via an in situ growth strategy to improve their photo/chemical stability, CO 2 capture and activation, and charge separation efficiency.
5 August 2017 in Journal of the Electrochemical Society
Activated carbon (AC) is one of the most typical carbon materials used for capacitive deionization (CDI) due to its large specific surface area and porous structure. However, the poor water wettability of AC remains a major challenge for CDI application in aqueous solutions. Here, polydopamine (PDA) is facilely modified on AC surface (PDA/AC) via self-polymerization of dopamine to improve its wettability, while the PDA thickness can be conveniently tuned by varying the soak time. X-ray photoelectron spectroscopy (XPS), Energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), N2 adsorption and contact angle measurements are taken to characterize the properties of PDA/AC. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) analysis indicate that PDA/AC electrodes exhibit an ideal electrochemical double layer capacitive behavior. The salt removal amount of 12 mg/g on PDA/AC with 4 h soaking is achieved during the desalination process, compared to 4.5 mg/g of AC electrode. The PDA/AC electrode is a very promising material for capacitive deionization.