19 September 2022 in IEEE Transactions on Instrumentation and Measurement
The hole-structural bearing crossbeam plays an important role in high-speed trains. In the service process, however, the long-term fatigue load may lead to structural damage such as cracks, resulting in performance degradation and failure. Ultrasonic guided wave (GW) technology is one of the most effective damage localization methods in structural health monitoring (SHM), with a high damage sensitivity and wide monitoring range. To address the damage localization in bearing crossbeams, a modified reconstruction algorithm for probabilistic inspection of damage (RAPID) based on the corrected probability distribution function is proposed. First, the valid sensor paths affected by damage are obtained using damage index (DI) based on correlation analysis. Then, the positional relationships between valid paths and damage are classified based on the time of flight (TOF). Finally, the damage diagnostic image and localization are obtained by fusion imaging using the corresponding probability distribution functions and shape factors, depending on different types of the path. The effectiveness was verified by numerical simulation and experiment. By taking the crossbeam of the high-speed train as the research object, through the static simulation of the crossbeam stress distribution under load, the damaged hot-spots area is obtained, and the sensor network is designed. And then, the SHM experimental system is constructed to perform damage localization experiments. The localization absolute error was less than 8 mm. Experimental results show that the proposed method can effectively locate the damage position in the crossbeam and has better accuracy and reliability than the traditional RAPID algorithm.
12 September 2022 in Structural Health Monitoring
Despite the numerous studies on bearing fault diagnosis based on frequency domain or time-frequency domain analyses, there is a lack of a fair assessment on which method or methods are practically effective in identifying the fault frequencies of damaged bearings in noisy environments. Most methods were developed based on experiments with simple lab test rigs equipped with bearings having manufactured artificial defects, and the signal-to-noise ratio under lab conditions is too ideal to be useful for verifying the effectiveness of a signal processing method. The purpose of this study is to evaluate the effectiveness of advanced signal processing methods applied in a high-speed train operating environment with multi-source interference. In this work, the most advanced signal processing methods (including spectral kurtosis, deconvolution, and mode decomposition) are studied, and the shortcomings of each method are analyzed. Based on the characteristics of high-speed train wheel set bearings (HSTWSBs), the concept of fault characteristic signal-to-noise ratio (FCSNR) is put forward to quantitatively evaluate the fault periodicity intensity, and corresponding improved methods are proposed by combining the FCSNR with existing signal processing methods; all these methods consider the periodic characteristics and impact characteristics of the bearing fault. The simulation signal and actual signals of HSTWSB with natural defects help verify the effectiveness of the proposed methods. Finally, the advantages and disadvantages of the different signal processing methods are objectively evaluated, and the application scope of each method is analyzed and prospected. This study provides a reference and new ideas for the fault diagnosis of HSTWSB and other industrial bearings.
19 April 2023 in IEEE Transactions on Instrumentation and Measurement
Ultrasonic guided wave (UGW) imaging technology has been extensively adopted to assess the structural performance of composite laminates for its high detection accuracy, quick speed, and real-time detection capability. However, the algorithm design in composite structures is hindered by the complexity and anisotropy of dispersion. It is still challenging to optimize localization and detection range in sparse sensing arrays though the probabilistic diagnostic imaging (PDI) method avoids precise signal analysis. In this study, a modified delay factor-based multiply-sum probabilistic diagnostic imaging (MDF-MSPDI) algorithm is examined. A novel ring-shaped probability distribution function based on the delay characteristics of damage scattering is defined, such that the off-axis localization and tolerance capabilities of the classical PDI method are enhanced. Subsequently, the delayed item is modified using the directional correlation of the group velocity in composite structures. Furthermore, given the spatial coherence of the path probability data, the new probability distribution terms are built through the nonlinear multiply-sum operation of path imaging to eliminate pointless damage artifacts and effects exerted by computational error. Lastly, the algorithm performance was verified through simulated damage and impact damage experiments on composite laminates. As indicated by the result, the proposed algorithm exhibits excellent localization capability for damage in the internal and edge of the sensing arrays.