22 December 2008 in IEEE Transactions on Wireless Communications
Recent work presented empirical data for which the small-scale fading statistics were more severe than Rayleigh; a phenomena deemed hyper-Rayleigh fading. This paper considers whether commonly utilized small-scale propagation models can be appropriately adapted to represent this class of fading. The work argues that the most meaningful model for the hyper- Rayleigh regime is based on a physical wave model (as opposed to stochastic); in particular, the TWDP model, where Deltaap1, holds the greatest promise. The crux of the argument is that the stochastic models significantly over-predict the amount of constructive interference in comparison to what is physically realizable.
18 April 2019 in IEEE Antennas and Wireless Propagation Letters
In this letter, we evaluate the performance of a reconfigurable, planar antenna design to mitigate frequency-selective, multipath fading. Prior work has shown that the diversity provided by two or three polarizations can significantly improve system performance. The considered antenna enables four distinct polarizations, two linear that are mutually orthogonal and two circular that are likewise. Measured 1% diversity gains in a reverberation chamber and in an office were 14 and 11.7 dB, respectively. While the linear and circular configurations are not uncorrelated, these gains are $\sim$4 dB greater than gains obtained by selecting between either two orthogonal polarizations. An empirical, geometry-based stochastic channel model is also presented to facilitate further study of polarization diversity in such environments.
15 November 2023 in IEEE Open Journal of Antennas and Propagation
Harmonic transponders are passive wireless devices that hold great promise for a variety of long-term tracking and sensing applications. These nonlinear devices receive an interrogation signal at one frequency (f) and backscatter harmonics (typically, 2f is of interest). The device’s conversion loss is the change in power from what is received and what is transmitted. We show herein that conversion loss is dependent jointly on interrogation power, interrogation frequency, and interrogation angle. This coupled nature of the device’s behavior necessitates performance metrics that capture these characteristics. We present a methodology to generically test these devices and propose metrics that capture the noted dependencies.
4 November 2019 in IEEE Transactions on Antennas and Propagation
Wireless systems are being deployed in evermore complex environments, ones that can introduce multipath resulting in not only severe frequency selective fading but also signal depolarization. Polarization diversity is a known technique to mitigate such fades. To date, primarily linear polarization (LP) systems have been used for indoor communications, but recently circularly polarized systems have received attention. As such there is motivation to better understand how both linearly and circularly polarized systems perform in depolarizing environments. In this work, we present a 3D geometry-based stochastic channel model (GBSCM) for dual-polarized systems to evaluate circular and linear polarization in cluttered settings. Using a Poisson distribution, the model generates a number of multipath scatterers. Measurements have been conducted at 2.4 GHz to validate the model. Leveraging parameters extracted from measured data, linear and circular polarization conditions are simulated for both line-of-sight (LOS) and non-LOS (NLOS) conditions. Cross-polar discrimination (XPD) and 1 link margins are considered as performance metrics. These metrics applied to both simulated and empirical data are both within 1 dB of each other.
5 November 2019 in IEEE Internet of Things Journal
Multi-element antenna systems have been shown to provide improved performance over single-element antennas in harsh, depolarizing propagation environments. However, how best to leverage these systems is still a challenge for low-cost implementations, e.g., for Internet of Things (IoT) devices. In this paper, we present a three-branch switched diversity scheme that models the transition between the elements of a tripolar antenna by means of a Hidden Markov Model (HMM), parameterized from measurement data. The proposed technique determines antenna polarization before each transmission using RSSI values, their probabilistic relationship with antenna elements, and transition probabilities among the diversity branches. Simulation and experimental results show that in high multipath environments, similar to those expected for many IoT networks, selection of the most likely antenna element before every transmission using the HMM approach leads to a median gain of 0.4 dB and -0.9 dB and a 1% diversity gain of 2.4 dB and -6.8 dB over conventional switched diversity and selection diversity, respectively, with no additional hardware costs. In addition, a hardware implementation demonstrates that the proposed method can reduce power drain from the battery by at least 15% as compared to selection and switched diversity techniques, with no degradation in packet delivery rates.
16 February 2022 in IEEE Internet of Things Journal
Adaptive multielement antennas can be leveraged to improve the reliability of wireless systems deployed in cluttered, depolarizing environments, such as those expected for Internet of Things (IoT) applications. While the performance improvement provided by such antennas has been well studied for individual links, multiple-hop networks have received little attention. In this work, we consider the problem of how devices in a multihop network should configure a three-element, tripolar antenna when deployed in a Rayleigh fading environment. We propose two switching-based antenna selection strategies: 1) Max-Sum and 2) Max–Min, each of which considers the channel conditions for communicating to nodes both higher and lower in the network hierarchy. We first derive the outage performance of the proposed schemes analytically and compare their performance with the well-known approaches of selection and switched diversity. Through simulations, which utilize empirical channel data from IoT devices equipped with a tripolar antenna, we show that the proposed Max-Sum and Max-Min schemes reduce antenna switching by over 80%, when compared to selection diversity. In addition, these two approaches lead to a median gain of 1.8 and 0.3 dB and a 1% diversity gain of 3.6 and 1.4 dB, respectively, relative to switched diversity.