Compared to conventional concrete, polyvinyl alcohol fiber reinforced engineering cementitious composite (PVA-ECC) offers high-strength, ductility, formability, and excellent fatigue resistance. However, impact-induced structural damage is a major concern and has not been previously characterized in PVA-ECC structures. We investigate the damage of PVA-ECC beams under low-velocity impact loading. A series of ball-drop impact tests were performed at different drop weights and heights to simulate various impact energies. The impact results of PVA-ECC beams were compared with mortar beams. A combination of polyvinylidene fluoride (PVDF) thin-film sensors and piezoceramic-based smart aggregate were used for impact monitoring, which included impact initiation and crack evolution. Short-time Fourier transform (STFT) of the signal received by PVDF thin-film sensors was performed to identify impact events, while active-sensing approach was utilized to detect impact-induced crack evolution by the attenuation of a propagated guided wave. Wavelet packet-based energy analysis was performed to quantify failure development under repeated impact tests.
In this paper, the damage characteristics of polyvinyl alcohol fiber-reinforced engineered cementitious composite (PVA-ECC) beams with high temperature damage under low velocity impact load were studied. A series of low speed impact tests were carried out to simulate the impact energy on the beam, and the impact response of the PVA-ECC beam with high temperature damage were compared with that without high temperature damage. The crack evolution and the wave attenuation were detected by the smart aggregate based active sensing method. The crack development was indicated by the energy of the wavelet packet of the received waves. The results showed that the impact resistance of PVA-ECC beam was significantly weakened after exposure to high temperature. The PVA reached its melting point at 230 °C and lost its function as reinforcement. Therefore, PVA-ECC lost its strength, toughness, and fatigue resistance after exposure to high temperature damage.