29 October 2021 in IEEE Transactions on Circuits and Systems I: Regular Papers
Neuromorphic computing can solve computationally hard problems with energy efficiencies unattainable for von Neumann architectures. A locally-active memristor, which possesses the capability to amplify infinitesimal fluctuations in energy and can be used to generate neuromorphic behaviors, is a natural candidate for constructing an electronic equivalent of biological neurons. This paper identifies some unknown neuromorphic dynamics of the Chua corsage memristor (CCM), and shows that the CCM, when biased at the edge of chaos domain, can exhibit rich dynamics of biological neurons. Using Chua’s theories of local activity and edge of chaos, we demonstrate that under the destabilizing of the input voltage and the circuit parameters (inductance or capacitance), two CCM-based circuits can produce thirteen types of neuromorphic behaviors either on, or near the edge of chaos domain via supercritical or subcritical Hopf bifurcation. In addition, we give the conditions to test the edge of chaos of the CCM and the CCM-based circuit only by using the poles and the zero of their admittance functions.
26 August 2020 in IEEE Transactions on Circuits and Systems I: Regular Papers
S-type locally-active memristor (LAM) has a great potential for brain- inspired neuromorphic computing, where the S-type LAM-based oscillator is a fundamental building block. Concerning the S-type LAM, this paper constructs a material-independent model in simple mathematical expression, which can be relatively easily analyzed. By biasing the memristor into the locally- active region, and connecting it with a capacitor, a second-order oscillator can be built. The small-signal equivalent circuit of the memristor and its frequency response are applied to determine the period oscillation frequency range and compensation capacitance. Hopf bifurcation theory is used to analyze oscillation mechanism of the second-order circuit and appropriate capacitance. By adding an extra inductor into the second-order oscillator, a novel third-order chaotic circuit is developed, where a saddle-focus is derived to create chaos. Its dynamic characteristics are investigated via Lyapunov exponents, bifurcation diagrams, dynamic route map, and so on. The local activities of the single memristor, second-order oscillator, and third-order chaotic circuit are verified through the mathematical analysis. Finally, physical circuit realizations of the S- type LAM-based oscillators, including the memristor emulator, are presented. Both simulation and experimental results demonstrate the practicability of the proposed mathematical model and the validity of the theoretical analysis.
28 June 2021 in Circuits, Systems, and Signal Processing
7 December 2021 in IEEE Transactions on Circuits and Systems I: Regular Papers
Locally-active memristor (LAM) is one of the promising candidates of artificial neurons, indicating it has potential applications in neuromorphic computing. Quantitative theoretical analysis on LAMs can provide benefits for designing related oscillator circuits and systems. This study begins with the aim of assessing the importance of DC V-I characteristic in the performance of LAMs by using small-signal analysis method. The DC V-I curve of the LAM is specified by two parameters involving resistance (conductance) and differential resistance (differential conductance). In addition to these two static parameters, we extract a crucial dynamic parameter to describe the behavior of the LAM. Theoretical analysis demonstrates that the performance of generic current-controlled and voltage-controlled LAMs is closely associated with three crucial parameters, i.e., the above two static and one dynamic parameters. Hence, only based on these three parameters, can one derive the small-signal equivalent circuit of LAMs and determine the oscillation frequency range and condition for simple LAM-based oscillators. By applying the presented universal dynamics analysis results, we further propose a modified mathematical model with higher accuracy to mimic the quasi-static and oscillating behaviors of a real Nb 2 O 5 device, and provide some fundamental guidance for the design of LAM-based high-frequency oscillators.
15 April 2020 in IEEE Access
This paper designs a simple mathematical model for the voltage-controlled locally-active memristor (LAM), which undoubtedly simplifies the theoretical analysis. Owing to the N-shaped outline of the DC V -I curve, this LAM is called as N-shaped LAM. The small-signal analysis method is exploited to obtain the equivalent circuit of the N-shaped LAM when it is biased into the locally-active region. The calculation results show that the LAM can be equivalent to a conductance with a parasitic capacitor, which makes for a deep insight into the mechanisms at the origin of LAM based oscillator. The theoretical analysis reveals that the N-shaped LAM along with an inductor and a battery can generate oscillation, which is confirmed by the numerical simulation. In addition, observe from simulation results that as the inductance increases, the oscillation behavior of the system deviates from the sinusoidal signal and tends to a relaxation oscillation. Finally, the physical circuit realization of the N-shaped LAM based oscillator including the memristor emulator is proposed. The good agreement between the experimental results and simulation results further demonstrates the correctness and feasibility of the theoretical design and analysis.
27 September 2018 in IET Electric Power Applications
The accuracy of flux linkage measurement is significantly important for a number of sensorless control methods for switched reluctance motor (SRM). This study proposes a novel flux linkage measurement circuit with the automated resistance correction, which comprises only circuit components. During the SRM sensorless operation, the dependence of resistance on temperature leads to the errors in flux linkage measurement and position estimation. The developed scheme is based on the zero‐crossing property which asserts that the flux linkage and current pass through zero simultaneously. Hence, the flux linkage error captured at the time when the current falls to zero represents the resistance error and is used for resistance correction. The proposed circuit has been successfully implemented and tested on a sensorless SRM system. Experiment results indicate that the proposed system in sensorless control can be operated stably at different load torques and at the condition of given speed mutation and load mutation, and the speed range in steady state with rated load torque is 0–160 r/min. The overall estimated position error remains within an acceptable margin of 2%. Hence, it significantly improves the sensorless position estimation and thus SRM performance.