This study investigates the effect of electric discharge machining (EDM) process parameters [current, pulse-on time (T_on), pulse-off time (T_off) and electrode material] on material removal rate (MRR), electrode wear rate (EWR) and surface roughness (SR) during machining of aluminum boron carbide (Al–B₄C) composite. This article also summarizes a brief literature review related to aluminum metal matrix composites (Al-MMCs) based on different process and response parameters, work and tool material along with their sizes, dielectric fluid and different optimization techniques used. The MMC used in the present work is stir casted using 5% (wt) B₄C particles of 50 micron size in Al 6061 metal matrix. Taguchi technique is used for the design of experiments (L₉-orthogonal array), while the experimental results are analyzed using analysis of variance (ANOVA). Response table for average value of MRR, EWR and SR shows that current is the most significant factor for MRR and SR, while electrode material is most important for EWR. ANOVA also confirms similar results. It is also observed that the optimum level of process parameters for maximum MRR is A₃B₁C₃D₃, for minimum EWR is A₁B₂C₃D₁, and for SR is A₁B₃C₃D₃.

For Drosophila melanogaster, cuticular melanisation is a quantitative trait, varying from no melanin to completely dark. Variation in melanisation has been linked with stress resistance, especially desiccation, in D. melanogaster and other species. As melanism has a genetic component, we selected melanic and non-melanic phenotypes of D. melanogaster in order to confirm the association of desiccation resistance and rate of water loss with cuticular melanisation previously reported for this species. A bidirectional selection experiment for dark (D₁–D₄) and light (L₁–L₄) body colour in D. melanogaster was conducted for 60 generations. We observed a 1.6-fold increase in abdominal melanisation in selected dark strains and a 14-fold decrease in selected light strains compared with control populations. Desiccation resistance increased significantly in the dark-selected morphs as compared with controls. The observed increase in desiccation resistance appeared as a consequence of a decrease in cuticular permeability. Our results show that traits related to water balance were significantly correlated with abdominal melanisation and were simultaneously selected bidirectionally along with melanisation.