15 June 2021 in Series of Geology and Technical Sciences
Using numerousexperimentalandfield researches, it was established that there are rock deformations duringoil and gas fields development, occurred due to thereservoir response. It has been established that formationvolume of pore space is decreased due to elastic expansion of rock grains and increase of compression strength transferred to matrix from mass of overlying rocks due to formation pressure depletion. As the result, there are deformation processes in porous medium accompanied by degradation of its porosity and permeability, and suffered greater change compared to the formation porosity, sufferedpermeability at the samepressure variation. Demonstration of mentioned anomalies under formation conditions leading to non-linear effect can strongly influence the whole process of the reservoir development and lead to various qualitative and quantitative differences between the observed facts and the indicators which were calculated using standard methods. Formulas for determination of debits of incomplete horizontally branched wells (HBW) in deformed formation for various number of horizontal shafts in a battery were obtained in this work using image method of drains (sources) and superposition. Obtainedestimate indicatorscan be used inengineering works during development of the deposits indeformed environment.
30 December 2020 in Studia Universitatis Babeș-Bolyai Chemia
Crude oil processing often requires the extraction of large amounts of water. Crude oil often mixes with water to form water-in-crude oil emulsions as a result of exposure such as high shear at the wellhead and natural surfactants in crude oil. These emulsions are undesirable and require demulsification to remove dispersed water and associated inorganic salts in order to meet production and shipping specifications. In addition, demulsifying these crude oil emulsions reduces corrosion and catalyst and consistently maximizes the overall profitability of crude oil production. The article looks into the results of tests on the selection of a demulsifier for the breakdown of water-in-oil emulsion mixtures at different settling times and temperatures depending on the specific consumption of the chemical agent, the effect of various demulsifiers on emulsions breakdown. The process of oil desalination with and without the addition of demulsifiers is considered. Desalination is carried out stepwise. Research results have shown that proxanol 305/50 is the most effective demulsifier.
1 October 2021 in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
OAOil and Gas Institute National Academy of Sciences of Azerbaijan
Oil and Gas Institute National Academy of Sciences of Azerbaijan
CYCaspian state university of technologies and engineering named after S. Yessenov
Caspian state university of technologies and engineering named after S. Yessenov
Numerous experimental and field studies have established that during the development of oil and gas fields, there are deformations of rocks that occur due to changes in reservoir pressure. It is established that with a drop in reservoir pressure, the volume of the pore space of the formation decreases due to the elastic expansion of the rock grains and an increase in compressive forces transmitted to the skeleton from the masses of the overlying rocks. As a result, there is a change in the deformation processes in the porous medium, accompanied by a decrease in its porosity and permeability, and a more significant change, compared with the porosity of the formation, is the permeability under one and the same pressure change. The manifestation of these anomalies in reservoir conditions, which cause nonlinear effects, can significantly affect the entire process of reservoir development and lead to various qualitative and quantitative discrepancies between the observed facts and the indicators that were calculated.