1 May 2026 in IEEE Transactions on Electron Devices
This study reports the design, fabrication, and performance of Ku-band solidly mounted resonator–bulk acoustic wave (SMR-BAW) devices engineered for high-frequency operation and enhanced thermal stability. By implementing a temperature-compensated Bragg reflector (BR) and a periodically poled aluminum nitride (AlN) piezoelectric layer, we achieved improved thermal stability in the Ku-band bulk acoustic wave (BAW) resonator. The fabricated resonators exhibit a series resonance frequency ( ${f}_{s}$ ) of 14.17 GHz, a parallel resonance frequency ( ${f}_{p}$ ) of 14.36 GHz, and a maximum quality factor ( ${Q}_{\max }$ ) of 258. The temperature coefficient of frequency (TCF) for the second-order thickness-extension (TE2) mode are measured as −28.62 ppm/°C for ${f}_{s}$ and −28.99 ppm/°C for ${f}_{s}$ and ${f}_{p}$ , respectively, demonstrating a marked improvement over state-of-the-art acoustic resonators in the same frequency band. Experimental results closely match simulation designs, validating the effectiveness of materials selection and structural design. These findings demonstrate an effective pathway for thermally stable, high-frequency acoustic devices for advanced wireless communications and high-precision frequency control systems.
20 February 2026 in IEEE Transactions on Electron Devices
Bulk acoustic wave (BAW) resonators with periodically poled piezoelectric films (P3F) are highly promising for super high frequency (SHF) in 5G and the emerging 6G radio frequency (RF) applications. Despite their potential, the dispersion relationship of P3F Al(Sc)N-based BAW resonators has not been systematically explored, which remains one of the most crucial device physics for understanding and engineering device resonant characteristics. This work presents a comprehensive investigation into the dispersion behaviors of BAW resonators fabricated with periodically poled AlN/AlN and AlN/Al0.7Sc0.3N stacks designed for Ku-band operation. Our analysis reveals the Type I dispersive nature of the second thickness-extension (TE2) mode. Furthermore, we establish a direct correlation between this dispersion and the presence of spurious resonances, providing crucial insight into their origin. To further optimize performance, we fabricated resonators with a frame structure, which demonstrated a significantly enhanced quality factor. Moreover, the major intrinsic acoustic dissipation mechanisms of P3F Al(Sc)N-based BAW acoustic devices are systematically investigated. Taken together, our findings on dispersion, spurious modes, and dissipation mechanisms provide a foundational understanding of periodically poled Al(Sc)N BAW resonators, which points to a pathway toward optimizing next-generation acoustic devices for high-frequency applications.
11 May 2026 in IEEE Microwave and Wireless Technology Letters
The evolution of wireless communication technologies demands RF filters with significantly wide bandwidths. For aluminum nitride (AlN)-based bulk acoustic wave (BAW) technology, increasing the Sc doping concentration is the primary strategy to enhance the electromechanical coupling coefficient ( $k^{2}_{eff}$ ), which is critical for bandwidth performance. This study presents the epitaxial growth of high-quality, single-crystalline Al0.6Sc0.4N piezoelectric thin films using a two-step method integrating metal–organic chemical vapor deposition (MOCVD) and physical vapor deposition (PVD), along with in situ inductively coupled plasma (ICP) pretreatment to suppress abnormally oriented grains (AOGs) growth. Leveraging high-quality Al0.6Sc0.4N film, we successfully fabricated high-performance film bulk acoustic resonators (FBARs). The optimized resonator achieves a resonant frequency of 5.8 GHz, a maximum quality factor ( $Q_{max}$ ) of 386, and a record $k^{2}_{eff}$ of 23.9%, representing the highest reported value among AlScN resonators to date and a fourfold increase compared to pure AlN BAW resonators. In addition, the resonator also exhibits a record performance metric of $f_{s} \cdot k^{2}_{eff}$ together with a competitive $k^{2}_{eff} \cdot Q$ among the reported AlScN BAW resonators. These results validate the huge potential of high-Sc-concentration AlScN for next-generation wireless communication applications, including 6G and Wi-Fi 6E/7/8.
1 November 2026 in IEEE Microwave and Wireless Technology Letters
This work reports the growth of high-crystallinity Al0.8Sc0.2N piezoelectric film on an 8-inch wafer, exhibiting a full-width at half-maximum (FWHM) of 0.32° in the (002) X-ray diffraction (XRD) rocking curve. Leveraging a cavity-embedded wafer bonding and device fabrication process, Al0.8Sc0.2N film bulk acoustic wave resonators (FBARs) were successfully realized with a resonant frequency at 5.149 GHz. The hero device exhibits a raw-measured maximum quality factor ( $Q_{max}$ ) of 1387, an electromechanical coupling coefficient ( $K_{eff}^{2}$ ) of 15.97%, and a figure of merit ( $\textit {FOM} =Q_{max}\cdot K_{eff}^{2}$ ) of 222. These results highlight the critical potential of heteroepitaxial AlScN BAW technology for next-generation 5G/6G and Wi-Fi communication applications.