17 January 2019 in IEEE Transactions on Microwave Theory and Techniques
This paper investigates the applicability of acoustic wave devices using an interdigital transducer placed on a thin piezoelectric crystal plate to the 3-5-GHz range, where significant performance degradation was expected in surface acoustic wave (SAW) devices. Three types of the SAW-like devices were fabricated by using a KrF stepper/scanner, and their performances are compared from various aspects: 1) a 3.5-GHz resonator using a rotated Y-cut LiTaO₃ plate attached on a Si substrate; 2) a 5-GHz resonator using a X-cut LiNbO₃ plate on a Si substrate; and 3) a 5.4-GHz A₁ Lamb mode resonator on a free-standing Z-cut LiNbO₃ plate. It is revealed that these devices offer excellent performances even in the 3-5-GHz range.
11 June 2018 in Japanese Journal of Applied Physics
In this paper, the use of a structure comprising a thin LiNbO 3 plate and a multilayered acoustic mirror composed of SiO 2 and Pt for high-performance longitudinal leaky surface acoustic wave (LLSAW) device is proposed. The mirror is expected to offer a much higher reflectivity than that composed of SiO 2 and AlN, which the authors proposed previously. The field distribution of these structures is calculated by using a finite element method. It is shown that the acoustic wave energy of the proposed structure is well confined in the vicinity of the top surface, and that leakage to the substrate is reduced. A one-port resonator is fabricated on the structure and its performance characteristics are evaluated. Owing to a high phase velocity of 6,035 m/s, which is about 1.5 times higher than that of conventional SAWs, a large impedance ratio of 71 dB was achieved at 3.5 GHz in addition to a large fractional bandwidth of 9.5%.
6 June 2014 in Japanese Journal of Applied Physics
20 June 2013 in Japanese Journal of Applied Physics
Lamb wave modes can be classified as a fundamental anti-symmetric mode (A0), a symmetric mode (S0), and their higher order modes. Membrane-type A1 mode Lamb wave resonators have been reported by the authors for future mobile communication systems. Although the reports show promising results, it is difficult to fabricate the resonators because they have a large dispersion of phase velocity and electromechanical coupling factor, and also are fragile. In this study, the authors suggest a solidly mounted resonator (SMR)-type S0 mode Lamb wave resonator, which can solve the above-mentioned difficulty. An SMR-type S0 mode Lamb wave resonator was successfully realized for the first time. The resonator exhibits a 1.5 times faster phase velocity and a 1/3 smaller temperature coefficient of frequency than the commonly used surface acoustic wave (SAW) devices composed of an Al electrode and a 36–48°YX-LiTaO3 substrate.
20 September 2013 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Currently, an ultra-wideband resonator is greatly needed to realize a tunable filter with a wide tunable range, because mobile phones with multiple bands and cognitive radio systems require such tunable filters to simplify their circuits. Although tunable filters have been studied using SAW resonators, their tunable range was insufficient for the filters even when wideband SAW resonators with a bandwidth of 17% were used. Therefore, the fabrication of wider-bandwidth resonators has been attempted with the goal of realizing tunable filters with wide tunable ranges. In this study, an SH 0 - mode plate wave resonator in a 27.5°YX-LiNbO 3 plate with an ultra-wide bandwidth of 29.1%, a high impedance ratio of 98 dB, and a high Q (Q r = 700 and Q a = 720) was realized. Two types of tunable filters were constructed using such SH 0 -mode resonators and capacitors. As a result, tunable ranges (bands) of 13% to 19% were obtained. The possibility of applying the SH 0 -mode resonator in the high-frequency gigahertz range is discussed.
1 July 2010 in Japanese Journal of Applied Physics
A leaky surface acoustic wave (LSAW) with a leaky component on a 0–15°YX-LiNbO3 substrate has a large electromechanical coupling factor. In order to change the LSAW to a Love wave without a leaky component, a high-density electrode with a low velocity such as a Au or Cu electrode is composed on the substrate. A SAW resonator with a Cu-electrode/15°YX-LiNbO3 structure has been reported to have a wide bandwidth of 12%. In this study, in order to obtain a SAW resonator with a wider bandwidth for application to tunable filters, the authors fabricated one-port resonators with a grooved Cu-electrode/4°YX-LiNbO3 structure. This resonator had a 1.3-fold wider bandwidth of 17% and 1.3-fold higher resonant and antiresonant frequencies than a conventional resonator composed of the same thick Cu-electrode on 4°YX-LiNbO3 fabricated for reference. Moreover, the authors proposed the application of this resonator to a tunable filter by using a circuit to modify a conventional band-pass filter composed of inductors and capacitors (LC) and a tunable filter with a ladder-type circuit. As a result, tunable filters having tunable ranges of 7 and 9% at the center frequency and 3 dB bandwidths of 3 and 5%, respectively, have been realized.